Hello. As my title describes, my pc won't boot past the Windows logo when the GTX980 is in.
The PC does boot in safe mode.
Specs:
I7 7700k no OC
MSI Z270 SLI-Plus
Corsair Vengeance DDR4 2400Mhz 16gb - 2 x 8gb
600watt CoolerMaster PSU
564watt effectively
I took 1 RAM module out to make sure that's not the problem.
I do not use any overclocks.
Here is what i have tried:
Uninstall all drivers manually and then install them again - didn't work.
I ran a memtest and everything is fine, no errors.
Uninstall all drivers with DDU and then install them again - didn't work.
Uninstall drivers and install them without the card in my system - didn't work.
Tried other cards: The GTX 1060 that i have works in it aswell as a 290X.
The drivers would install with the graphics adapter set to IGD (using onboard graphics with the GTX980 in the PCI-E slot and powered by the 2x 6+2 PINS)
The GTX980 powers up, both fans spin at startup en the led's are on.
The PC starts up, shows the Windows logo, then flickers for a millisecond on the page where you usually select the user and login. Then it restarts and does this 3 times. After that it gives me the option to do several things like rerolling or booting in safe mode.
UPDATE
I updated the BIOS to the newest version, the problem remains.
I disabled powersaving on Windows aswell as on my monitor.
I tried several PCI latency timers.
I set the PCI-E powerlink to disabled.
UPDATE 2
The problem remains.
The device manager says code: 43 (driver issues).
I have tried to just install the driver manually without any other thing like nvidia audio etcetera.
UPDATE 3
At startup my PC now comes with another error: VIDEO_TDR_FAILURE
Nvlddmkm.sys failed.
Does anyone know what tot do?
The PC does boot in safe mode.
Specs:
I7 7700k no OC
MSI Z270 SLI-Plus
Corsair Vengeance DDR4 2400Mhz 16gb - 2 x 8gb
600watt CoolerMaster PSU
564watt effectively
I took 1 RAM module out to make sure that's not the problem.
I do not use any overclocks.
Here is what i have tried:
Uninstall all drivers manually and then install them again - didn't work.
I ran a memtest and everything is fine, no errors.
Uninstall all drivers with DDU and then install them again - didn't work.
Uninstall drivers and install them without the card in my system - didn't work.
Tried other cards: The GTX 1060 that i have works in it aswell as a 290X.
The drivers would install with the graphics adapter set to IGD (using onboard graphics with the GTX980 in the PCI-E slot and powered by the 2x 6+2 PINS)
The GTX980 powers up, both fans spin at startup en the led's are on.
The PC starts up, shows the Windows logo, then flickers for a millisecond on the page where you usually select the user and login. Then it restarts and does this 3 times. After that it gives me the option to do several things like rerolling or booting in safe mode.
UPDATE
I updated the BIOS to the newest version, the problem remains.
I disabled powersaving on Windows aswell as on my monitor.
I tried several PCI latency timers.
I set the PCI-E powerlink to disabled.
UPDATE 2
The problem remains.
The device manager says code: 43 (driver issues).
I have tried to just install the driver manually without any other thing like nvidia audio etcetera.
UPDATE 3
At startup my PC now comes with another error: VIDEO_TDR_FAILURE
Nvlddmkm.sys failed.
Does anyone know what tot do?
Facebook
Twitter
Instagram