msi h110m pro-vd doesn't post

[KennyMccormick]

Hi guys,

I have built a PC but it doesn't post. The monitor says that it doesn't have a signal.

SPECS:
CPU: G4560
GPU: msi gtx 1050ti oc
MB: msi h110m pro-vd
ram: 8gb single crucial stick
PSU: corsair vs 450

The cpu lamp goes on for an instance, then it goes to DRAM and stays on for like 10-15 seconds. After that it doesn't go to the VGA lamp.

Thanks!

All the fans turn on. PSU CPU fan, case fan.

 

[DSzymborski]

You need an updated BIOS to run a Kaby Lake on an h110. Conctact MSI.

 

[smorizio]

https://us.msi.com/Motherboard/support/H110M-PRO-VD.html#down-bios
check the mb see if the bios lable is 2a. if it is pull the gpu and one ram stick see if onboard video posts.

 

[Calvin7]

You need 6th Generation CPU to get the board to work. Then you can flash BIOS to use 7th Generation G4560. A Celeron G3900 Skylake is about $45.