[SOLVED] MSI H310-A PRO - EZ Debug LED stops after DRAM

[henryk1984]

Hello everyone. I have following problem. I put together:
-MSI H310-A PRO
-GoodRam DDR4, 16 GB,2400MHz, CL17
-Intel Core i5-9600K, 3.7GHz, 9MB
-GeForce GTX 1060(leftover from previous pc)
EZ Debug cpu goes on for a sec then dram for like 5 sec and then nothing. Nothing beeps but that may be due to my casing(i had to switch cables on POWER LED). Same behavior if I change ram slot. Same behavior if i connect monitor directly to MB. Same behavior after CMOS reset. Any ideas what else can I try? Thanks in advance for help.

 

[rgd1101]

https://www.msi.com/Motherboard/support/H310-A-PRO#support-cpu
bios up to date to support that cpu?

 

[henryk1984]

https://www.msi.com/Motherboard/support/H310-A-PRO#support-cpu
bios up to date to support that cpu?

I don't know how to check bios version without geting to bios. No info on box:/

 

[rgd1101]

if you just got the motherboard, most likely it doesn't have the version to run 9th gen. take it to a shop or contact msi

 

[henryk1984]

if you just got the motherboard, most likely it doesn't have the version to run 9th gen. take it to a shop or contact msi

I'm total idiot. Yup, I just checked socket, didn't bother with generation. Thanks.
Do I have to resolve thread myself or do moderators do that?