Hi everyone. My problem is that, when I tried turning on my PC that I built, it turned on but the BIOS would not show. No LEDs were indicating any errors at the time. After turning off and turning it back on, the red light for RAM displayed. I then turned it off and then reinserted the RAM. Finally, I turned it off and on back again and again nothing displayed, while the CPU light was held on red. After restarting this error occurred again. There is a extremely slight bending on one pin on the inner part of the CPU array after looking from the beginning, but I'm not 100% sure if this is the issue. Additionally, there are red lights appearing at the bottom of the motherboard. If someone could assist me, it would be greatly appreciated. My specs are as follows:
CPU: Intel Core i3-6100 3.7GHz Dual-Core Processor
Motherboard: MSI H110M Gaming Micro ATX LGA1151 Motherboard ($69.99 @ SuperBiiz)
Memory: Kingston HyperX Fury Black 8GB (2 x 4GB) DDR4-2133 Memory
Storage: PNY CS1311 240GB 2.5" Solid State Drive
Video Card: EVGA GeForce GTX 750 Ti 2GB Superclocked Video Card (I removed this, though the issue still occurred)
Case: Corsair 200R ATX Mid Tower Case
Power Supply: EVGA 430W 80+ Certified ATX Power Supply
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2016-07-25 19:38 EDT-0400
CPU: Intel Core i3-6100 3.7GHz Dual-Core Processor
Motherboard: MSI H110M Gaming Micro ATX LGA1151 Motherboard ($69.99 @ SuperBiiz)
Memory: Kingston HyperX Fury Black 8GB (2 x 4GB) DDR4-2133 Memory
Storage: PNY CS1311 240GB 2.5" Solid State Drive
Video Card: EVGA GeForce GTX 750 Ti 2GB Superclocked Video Card (I removed this, though the issue still occurred)
Case: Corsair 200R ATX Mid Tower Case
Power Supply: EVGA 430W 80+ Certified ATX Power Supply
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2016-07-25 19:38 EDT-0400
Facebook
Twitter
Instagram