Msi Motherboard won't boot After OC

[EntengIce09]

Hello, so I am having this problem with my system.I upgraded my Computer to msi b350 mortar and R5 1400, everything is fine at first but when I try to overclock or change the ratio on bios even only a little bit and try to apply it, after the restart my pc won't boot, no display, no light on ez debug but the fans are spinning. I have to clear the cmos to fix it.I also have the latest bios update.What do you think is the problem?Also when I overclock with Ryzen master to 3.7ghz with 1.30v it runs just fine.Thank you In advance and sorry for my bad english

 

[zyh1987]

You can try to leave voltage on auto, and increase the ratio try not to set voltage yet. Also you should bump up the load line calibration, from regular to medium.

 

[zyh1987]

Ryzen master probably tunes more than just the click and voltage in the back ground.

 

[EntengIce09]

Already tried living the voltage on auto and changing the ratio to only 37.00, still the same.Could this be just a bug in the bios version?

 

[zyh1987]

How about you load line calibration ?

And soc voltage.

 

[EntengIce09]

How about you load line calibration ?

And soc voltage.

I will try this when I got home and i'll update you soon.Thank you for the response.

 

[EntengIce09]

In my CPU LLC there is no medium option, there is only mode 1-8. Should I start at 1?

 

[zyh1987]

start with something in the middle, does it tell you what 1 and 8 will look like? i think 1 is the highest (if it shows a graph, whichever option has the flat line is the highest, and the one with most negative slope is the lowest, start from that side first)

if 1 is highest, start with 6, if 8 is the higest start with 3.

actually here is a guide with msi uefi,
https://forum-en.msi.com/index.php?topic=286610.0

you will want to set your llc, i don't see the guide mentioning anything regarding llc setup.

 

[EntengIce09]

Hello, sorry for the late reply . I didn't see your answer. I tried underclocking it to 3ghz but still the same result. It will restart a few times with the debug led on the CPU and then it will boot, and when I go to the bios the cpu ratio is at 30.00 but the Adjusted CPU frequency is at 32.00
It seems that my overclock is saved in the bios but it didn't applied. Do you think this is a problem with the ryzen cpu? Should I send it to RMA? Sorry for my bad english and late reply