I'm using MSI(ms-7680) H61m-p23(g3) motherboard.
Few days ago I was update the BIOS with MSI Live Update 6 in Windows mode. All things are done correctly. When restart PC then stuck at (right corner) A3, doesn't beep.
Then i clear CMOS , then shows like that information=>
________________________________
E7680IMS V18.5 10/16/2013
Intel(R) Pentium(R) CPU G2020 @ 2.90GHz, Speed 100×29=2900MHz
DRAM Frequency for DDR3 1333 MHz(Single channel)
DRAM Size is 2048 MB
USB Device total: 1 KBDs O MICE, O MASS, 2 HUBS
Detected ATA/ATAPI Devices...
SATA Port 2: TOSHIBA DT01ACAO50
All settings were reset to default values.
Press F1 to Run SETUP
Press F2 to Continue
_________________________________
When I clicked F1 button then hanging up at Entering Setup.... !!!
I unplugged the power-cord and cleared CMOS, unplugged all the components and devices from the mobo,then i reinstalled the cpu,onboard vga,ram(one piece), I installed keyboard on other USB port on the mobo. I checked it many times, bt same results are showing here.
I tried this process many times.
Please give me a solution.
Few days ago I was update the BIOS with MSI Live Update 6 in Windows mode. All things are done correctly. When restart PC then stuck at (right corner) A3, doesn't beep.
Then i clear CMOS , then shows like that information=>
________________________________
E7680IMS V18.5 10/16/2013
Intel(R) Pentium(R) CPU G2020 @ 2.90GHz, Speed 100×29=2900MHz
DRAM Frequency for DDR3 1333 MHz(Single channel)
DRAM Size is 2048 MB
USB Device total: 1 KBDs O MICE, O MASS, 2 HUBS
Detected ATA/ATAPI Devices...
SATA Port 2: TOSHIBA DT01ACAO50
All settings were reset to default values.
Press F1 to Run SETUP
Press F2 to Continue
_________________________________
When I clicked F1 button then hanging up at Entering Setup.... !!!
I unplugged the power-cord and cleared CMOS, unplugged all the components and devices from the mobo,then i reinstalled the cpu,onboard vga,ram(one piece), I installed keyboard on other USB port on the mobo. I checked it many times, bt same results are showing here.
I tried this process many times.
Please give me a solution.