Hello,
I´ve just bought used older MSI Z87 G45 Gaming with ddr3 ram (2x4gb 1600mhz) and i5 4570 for my grandfather.
I assembled pc together put rams to slot DIMM 2/4 and tried to turn it on - all fans are spinning, but on monitor is no display and thats it.
Later I´ve tried experiment a little bit with memory sticks and pc will post without any troubles if ram memory is in 3/4.
Even both dimm stots 3/4 will post but if any sticks is in dimm 1/2 pc wont boot and I will stay with black screen and just fans spinning.
I´ve double checked socket and pins in MB - it looks like there is no visible damage and pins are not bented.
I´ve get same results with different CPU and with with different pair of rams.
EDIT: I asked a guy before where he used RAM in his older config and he told me 2/4. :/
Thx for any suggestions.
Is this somehow repairable at home?
I´ve just bought used older MSI Z87 G45 Gaming with ddr3 ram (2x4gb 1600mhz) and i5 4570 for my grandfather.
I assembled pc together put rams to slot DIMM 2/4 and tried to turn it on - all fans are spinning, but on monitor is no display and thats it.
Later I´ve tried experiment a little bit with memory sticks and pc will post without any troubles if ram memory is in 3/4.
Even both dimm stots 3/4 will post but if any sticks is in dimm 1/2 pc wont boot and I will stay with black screen and just fans spinning.
I´ve double checked socket and pins in MB - it looks like there is no visible damage and pins are not bented.
I´ve get same results with different CPU and with with different pair of rams.
EDIT: I asked a guy before where he used RAM in his older config and he told me 2/4. :/
Thx for any suggestions.
Is this somehow repairable at home?
Last edited: