A anaturelover Distinguished Jun 24, 2012 450 1 18,685 Jul 3, 2020 #1 hi one day when pulling my usb key , it separated in 3 parts.,, i didnt solve how to reunite them so i mlooking to recover data simply has anyone done that?
hi one day when pulling my usb key , it separated in 3 parts.,, i didnt solve how to reunite them so i mlooking to recover data simply has anyone done that?
Solution Gerald6049 Jul 7, 2020 Maybe this can help, similar like this pict. then just insert to usb port.
Gerald6049 Estimable Jun 9, 2020 786 85 3,040 Jul 4, 2020 #2 It,s okay, you can just insert the USB key (the black one) to USB port. Upvote 0 Downvote
A anaturelover Distinguished Jun 24, 2012 450 1 18,685 Jul 4, 2020 #3 the black slice is too slime, the contact is not stable if i dont push with my thomb Upvote 0 Downvote
Gerald6049 Estimable Jun 9, 2020 786 85 3,040 Jul 6, 2020 #4 So you have to insert the USB metal tip with the black slice. and You will need a clamp to take out the metal tip after use. Upvote 0 Downvote
So you have to insert the USB metal tip with the black slice. and You will need a clamp to take out the metal tip after use.
A anaturelover Distinguished Jun 24, 2012 450 1 18,685 Jul 6, 2020 #5 how can i know the end in wich i put the black back and side up down.? the metal thing is similar but tiny differences seems to be seen Upvote 0 Downvote
how can i know the end in wich i put the black back and side up down.? the metal thing is similar but tiny differences seems to be seen
Gerald6049 Estimable Jun 9, 2020 786 85 3,040 Jul 6, 2020 #6 They should look like this right ? The metal surface on the black slice, should contact the metal surface in the USB port. Upvote 0 Downvote
They should look like this right ? The metal surface on the black slice, should contact the metal surface in the USB port.
A anaturelover Distinguished Jun 24, 2012 450 1 18,685 Jul 7, 2020 #7 yes but in order to do so it need so sort of pressure. you suggest to insert the black thing back in the aluminium rectangle but which side ? is there another way to make the black thing have contact without getting loose? Upvote 0 Downvote
yes but in order to do so it need so sort of pressure. you suggest to insert the black thing back in the aluminium rectangle but which side ? is there another way to make the black thing have contact without getting loose?
Gerald6049 Estimable Jun 9, 2020 786 85 3,040 Jul 7, 2020 Solution #8 Maybe this can help, similar like this pict. then just insert to usb port. Upvote 0 Downvote Solution
A anaturelover Distinguished Jun 24, 2012 450 1 18,685 Jul 7, 2020 #9 yes how is that called i ll buy one Upvote 0 Downvote