My Acer Monitor constantly displays "No signal"

[epiccharizard101]

My KG240 Monitor has displayed no signal in every port I try, even when I take out the gpu and start running it from integrated graphics. The PC itself seems to be running fine, I just built it, but because of this issue I can't get into the Bios and install windows. Any help?
My Pc Specs:
i7-7700k
Hyper 212 evo
Asus RoG Strix z270e gaming motherboard
Corsair vengeance 16gb kit (4x4)
EVGA GTX 1060 3gb FTW+
EVGA 400w Power Supply
Corsair Carbide 200r

 

[terry4536]

Try resetting the monitor first. Disconnect all cables and the power cord for 30 seconds or so.

 

[terry4536]

Next, try the troubleshooting steps in the manual. If that doesn't resolve the issue, then return the monitor.

 

[terry4536]

But to boot into your system, you will have to switch out the monitor. You can try borrowing a monitor. You can use a TV for a monitor as well.

 

[firebird1133]

are you certain that your new rig works? Dean On Arrival motherboards aren't rare and that would cause no video for sure. Have you tried using a TV or other monitor to confirm it isn't the PC?

 

[epiccharizard101]

Thanks for trying, but I did some digging around and turns out I bent most of the CPU Socket pins... Thanks for the help, though!