Question My aio isnt working

Dec 17, 2020
34
1
35
I installed my aio and the fans were spinning but no RGB and the block has RGB in it and my temps are so high I need help
 
My pc components are i3 9100f 16GB of ram b365m ds3h motherboard and cooler master masterliquid lite 240
Your cooler master masterliquid lite 240 pump should be connected to one of 2 x system fan headers set manually to run full speed all the time.
It's fans should be connected to CPU_Fan header.
If it's still not cooling properly I suggest you review installation making sure that there's nothing in between CPU and pump except paste.
For fan lights, that 4pin cable should be connected to RGB LED strip header on the motherboard.
For RGB lights control use https://www.gigabyte.com/MicroSite/512/rgb2.html
 
  • Like
Reactions: HaydenCarter

FarmerFran

Distinguished
Nov 18, 2009
194
10
18,715
This was my first real adventure into the AIO, I got the iCUE H150i, by first I mean with a controller, RGB more than 1 fan etc...

I can tell you read the manual then re-read it. Then hook it up and check your connections 2x. Check the motherboard manual to see if it says anything there
 
  • Like
Reactions: Phaaze88