Question My computer frezes during installing windows

Oct 15, 2019
7
0
10
0
Hi guys my computer is brand new and all components are good and are compatiable with windows 10 and i booted installation from usb drive and it done the installation but when it restarted every time it freezes on the screen with name of motherboard...
Can u help me pls??
I tried to restart it and power off again same...
 
Oct 15, 2019
7
0
10
0
I didnt get on that setting i just put in flash drive and started it automatically booted form usb and i did the fisrst steps and i chose on that windows shoukd be on ssd and it finished and then it restarted and then it frezed on the screen.
Now i created the bios update on flash drive but idk if it is the proper way created i can give u link from my motherboard https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=912#download
And i think it only copied files if am i sure?
Btw i can get to the bios and i can update it but when i run insto that screen when u chose if u want to flash bios i saw the latetst bios update was 18/7/2019.
And i am to scared to flash it and i dk what file i need to use to flash it?
Specs:
Mb:https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=912#download
Ram:2x8 gb 2600 i think
Proc: ryzen 5 3400g
Graf: zotac 1650
Ssd 250gb and hard drive 1 T
 
Oct 17, 2019
13
1
15
0
Here are the solution if your PC gets stuck at motherboard screen
Solution 1: Restart your PC
Solution 2: Boot in Safe Mode
Solution 3: Check your Boot order
Solution 4: Check the RAM
Solution 5: Clear the CMOS (BIOS)
Solution 6: Perform a Fresh Install
 
Last edited:

ASK THE COMMUNITY