My computer lags, are my voltage readings ok?

[shumoc]

http://imgur.com/a/b6HBD

I know my motherboard is out of date but could that really be it? I can't play my games because of lag and really loud computer. My friend said temperature was ok.

I'm really bad at computers. But the only thing i can suspect is an old PSU. Please help!

 

[DSzymborski]

Software voltage data tends to be quite poor. What PSU are you using?

 

[Vic 40]

Look at the bios or do the next,

download hwinfo32,
install and open it,
check "sensors-only",
click "run".

i think you use Hwmonitor now and that doesn't always produce the right nrs. It might as well be that the motherboard isn't well supported in those programs.So no those nrs aren't right ,but the pc shouldn't be running with those voltages anyway so they are wrong.

Might as well give some system info to see what can make things lag,

download hwinfo32,
install and open it=click run,
close the top window which is the system summary,
at the left top click "save report",
at the bottom of the next window check "short text report",
after that you'll see what's in the pc,
copy by clicking "copy to clipboard" and rightclick+paste in your next respons

in this you don't check "sensors only',but open the program as it starts.

 

[shumoc]

Software voltage data tends to be quite poor. What PSU are you using?

I'm using a XFX Core Edition 550W 80+ Bronze since 2012

Software voltage data tends to be quite poor. What PSU are you using?

Look at the bios or do the next,

download hwinfo32,
install and open it,
check "sensors-only",
click "run".

i think you use Hwmonitor now and that doesn't always produce the right nrs. It might as well be that the motherboard isn't well supported in those programs.So no those nrs aren't right ,but the pc shouldn't be running with those voltages anyway so they are wrong.

Might as well give some system info to see what can make things lag,

download hwinfo32,
install and open it=click run,
close the top window which is the system summary,
at the left top click "save report",
at the bottom of the next window check "short text report",
after that you'll see what's in the pc,
copy by clicking "copy to clipboard" and rightclick+paste in your next respons

in this you don't check "sensors only',but open the program as it starts.

I'll look into it, unfortunately I won't have access to my computer for a while now but when I do I'll make another thread.