Question My CPU reaches 80-90 on high load. Help

[MoonMoonboi15]

I have a Ryzen 2600 with 1060 3gb. While my gpu reaches 75 max on furmark on %100 load. My cpu can't handle %100 overtime and crashes after 90~degrees.

I don't have much money to spend (1$ is 6 here). I will get a cpu cooler later on but i need a temporary solution. For example, how can i undervolt or underclock my cpu ? (Ryzen Master doesn't work on my pc btw)

My motherboard is Asus 350M-A and i couldn't find the option to underclock my cpu.

I have 2 case fans(80 and 120mm) 1 cpu(stock Stealth) 2 gpu fans (stock asus)

Also my idle temps are 40-50

My room temp is 25-30 with 60-80 humidity.

Yeah i know the basic stuff (dust,bad air flow,... but my gpu is completely fine)

 

[rgd1101]

get ryzen master https://www.amd.com/en/technologies/ryzen-master

 

[NightHawkRMX]

What are you using to monitor temps?
Make sure the cooler is securely mounted. You may want to repaste the CPU.

 

[MoonMoonboi15]

get ryzen master https://www.amd.com/en/technologies/ryzen-master

(Ryzen Master doesn't work on my pc btw)
read the whole thing please

 

[MoonMoonboi15]

What are you using to monitor temps?
Make sure the cooler is securely mounted. You may want to repaste the CPU.

HW monitör and ryzen master but ryzen master does not apply after rebooting. Thats the problem.

 

[NightHawkRMX]

https://www.reddit.com/r/Amd/comments/5yqxfv/ryzen_master_not_applying_after_reboot/


Hwmonitor is accurate from my findings.
Look for the CPU core voltage and CPU core frequency in bios.

 

[rgd1101]

why not isn't it B350 chipset?

 

[MoonMoonboi15]

why not isn't it B350 chipset?

It is, i used it before and it worked but now for some reason i cannot change it back to normal clock. (I was testing games to how much fps i will get at full speed) And now its locked at between 3600-3900, it keeps changing in ryzen master and hwmonitor

 

[NightHawkRMX]

Changing voltage and clocks is normal for ryzen.

 

[truegenius]

your idle temps are high, i suspect improperly mounted cpu cooler.
Try remounting it using new good quality thermal paste ( will need to buy paste though )
btw you can change clock/voltage in bios.

 

[MoonMoonboi15]

your idle temps are high, i suspect improperly mounted cpu cooler.
Try remounting it using new good quality thermal paste ( will need to buy paste though )
btw you can change clock/voltage in bios.

I changed the clock to 34.00 (stock) but it is still going up and down. I cannot change the voltage, it says offset and i can only increase the voltage. I want it lower for temps

 

[truegenius]

can you post screenshot of what settings it show in bios ( in AI tweaker probably )

 

[MoonMoonboi15]

I will give the bios screen. My internet is slow 2 mins.

 

[NightHawkRMX]

An undervolt isnt needed if the cooler is mounted correcrly. First id try to remount and repaste the cpu.

 

[MoonMoonboi15]

can you post screenshot of what settings it show in bios ( in AI tweaker probably )

https://snag.gy/iK4Hfd.jpg (AI tweaker settings)

https://snag.gy/lebPrm.jpg (HW Monitor readings) (CPU)

https://snag.gy/8VBQys.jpg (The settings i put on bios)

I dunno what is happening, i put the bios settings before posting this thread. It keeps overclocking itself to 3800-3700 and voltage too

 

[MoonMoonboi15]

An undervolt isnt needed if the cooler is mounted correcrly. First id try to remount and repaste the cpu.

Will do but the thermal paste could take a while. I use the stock paste that came with the cooler and need to order from internet.

Gonna sleep. True genious i cannot answer you in 10 hours.

 

[truegenius]

here is a video explaining all the settings you want to know to underclock/overclock

View: https://m.youtube.com/watch?v=HOjJmXhf1DY

 

[MoonMoonboi15]

here is a video explaining all the settings you want to know to underclock/overclock

View: https://m.youtube.com/watch?v=HOjJmXhf1DY

Thanks for the info. I think my 3400 setting wasn't applying becasue i didn't make a profile. For now i won't do any editing until i get my thermal paste.