I have a xeon x5670 with 24 gb of ram in an Asus sabertooth 58x. I use it to run a minecraft server which it did at a time. I left the computer on for a few hours and when trying to get into it with teamviewer it would not show up. I didnt bother plugging in to a monitor because it's a hassle, hence the teamviewer but my best guess was that it went unresponsive with the server running for a while.
NOW.
My issue is that I hard shut it down and now it will not boot. I get a DRAM led error. I took out the sticks reset the cmos battery and even hit the memokay button. I did some overclocking to the board before because it wasnt reading my full 24 gb of ram, just 20. After adjusting the voltage it showed up. I suspect that is the issue because I never had this issue before. But how do I go back into my bios and fix the voltage? How do I keep it from misreading my ram?
NOW.
My issue is that I hard shut it down and now it will not boot. I get a DRAM led error. I took out the sticks reset the cmos battery and even hit the memokay button. I did some overclocking to the board before because it wasnt reading my full 24 gb of ram, just 20. After adjusting the voltage it showed up. I suspect that is the issue because I never had this issue before. But how do I go back into my bios and fix the voltage? How do I keep it from misreading my ram?