my first liquid cooling build

[Elementxyz]

hey guys this is my first liquid cooling build and i dont want to make a mistake
this is my setup
i7 4770k
asus maximus VI formula
amd radeon r9 290x
16 gb corsair vengence ram
seasonic 1000w platinum psu
nzxt phantom 630

my liquid cooling parts
Tygon 2475 Ultra 1/4" ID (3/8" OD) tubing

Alphacool NexXxoS triple 120mm rad

Alphacool NexXxoS dual 120mm rad

EK Supremacy Clean Nickel + Green Acrylic cpu water block

EK-FB KIT ASUS M6F - Acetal+Nickel
motherboard water block

Koolance VID-AR290X vga water block

i want to know how much compressed fittings i need and how thick radiator i can fit on top and front of the case and how much tubing i need and best pump Reservoir for my needs and best uv green coolant

also any suggestion for my build or any changes i should make

thanks in advance

 

[g-unit1111]

What's the primary use of this rig? If it's strictly gaming there's no need for the i7 or 16GB of RAM. 1K PSU is mega overkill for a single card setup, you could easily get by with 750W or 850W. And instead of the 290X I'd go with a GTX 780Ti if I had that kind of money to spend on a GPU.

 

[Elementxyz]

What's the primary use of this rig? If it's strictly gaming there's no need for the i7 or 16GB of RAM. 1K PSU is mega overkill for a single card setup, you could easily get by with 750W or 850W. And instead of the 290X I'd go with a GTX 780Ti if I had that kind of money to spend on a GPU.

thanks for your suggestions
it primary use is gaming but my father uses some heavy engineering programs thats why i7 and 16gb ram and 1k psu because i will buy another r9 290x later for crossfire and does the 1gb extra graphic memory and 512 bit give 290x any egde over 780ti
thanks