my high end Pc slows down up to 100x when transferring datas

[anjuva]

My high end PC sytemspecifications:
- CPU Intel 19-7920x 12 core
- main board Gigabyte GA-X299 AORUS
- 128 GB RAM Ballsitix = 8x 18 GB
- SSD PCIE Samsung NVMe 960 EVO m.2 = 2x 500GB window 10 + aps
- 3x 6TB hard discs
- Video board GTX 1070 8 Gb Ram
- 750W Corsair
- windows 10 pro
system reinstalled beginning march 2017 but no improvement

 

[ArchitSahu]

What are you transferring between?

Am not too sure, but if you are transferring large amounts of files to Hard drives, it will slow down due to the slower speed of HDD's.

 

[Colif]

MERGED QUESTION
Question from anjuva : "datransfer collapses up to 100x times slower in high end pc"

I have a problem with a high end Pc: the speed of data transfer collapses from 2,5 GB/sec down to any value up to 25MB/sec, thats 100x slower. for test i use a 8GBt fotoshop scratch file (or other fotoshop files) i thought ist a problem of window 10 explorer. I tried same file on window 7 slower pc. there the speed is 10x slower but stable. so my question is: is this drop of speed an exprorer problem or a possible conflict in the high end pc? I have 218 Giga ram and samsung 500Gb NvMe SSD and latest motherboard and processor. I would be grateful to a solution, since we dontfind the answer to the problem since 10 weeks, since we got the Pc! thanks for any help

You have 218 gb of RAM? Man, that is massive. My data transfer on my Windows 10 PC is in the 2 gb per second range, but I only have 16 gb of RAM. I think that you are running too much RAM.

 

[Colif]

helps to put info in 1 thread, not sprinkle same question over multiple and get conflicting answers

 

[rgd1101]

MERGED QUESTION
Question from anjuva : "have a brandnew latest technology Pc and it is too slow"

I have asked a company to build a latest technology PC with 128 GB Ram. I have run many Benchmarc tests with superior scores, yet the PC is to slow even at low use of CPU and Ram. above 30-40% Ram or CPU it slows down a lot more or even freezes. we have tried hard since the last 4 Weeks dont find the problem. can you help how to diagnose the problem? Harware seems to be ok

What's your full system specs? Have you checked the hard drive? GPU usage?

MERGED QUESTION
Question from anjuva : "brandnew high end Pc 125 GB Ram too slow"

tried many benchmarks wit top results, but still the PC is too slow. at ca. 30% Ram or CPU usage becomes very slow or even freezes. managed to increase the RAM use via large Fotoshop files by closing all scratchdisc options. yet it lakes too long time for fotoshop to open files

Specs?

Please stick with 1 thread, and not spam the forum
And answer the question about your full system spec

 

[anjuva]

What are you transferring between?

Am not too sure, but if you are transferring large amounts of files to Hard drives, it will slow down due to the slower speed of HDD's.

i have solved that problem by exchanging the SSD from Samasung with the Pro version. But we found out, that two rams sticks had defects, and that one slot of the motherboard does not work. can anyone recommend, which other motherboard could be more compatible for this configuration?

 

[anjuva]

What are you transferring between?

Am not too sure, but if you are transferring large amounts of files to Hard drives, it will slow down due to the slower speed of HDD's.

MERGED QUESTION
Question from anjuva : "have a brandnew latest technology Pc and it is too slow"

I have asked a company to build a latest technology PC with 128 GB Ram. I have run many Benchmarc tests with superior scores, yet the PC is to slow even at low use of CPU and Ram. above 30-40% Ram or CPU it slows down a lot more or even freezes. we have tried hard since the last 4 Weeks dont find the problem. can you help how to diagnose the problem? Harware seems to be ok

What's your full system specs? Have you checked the hard drive? GPU usage?

MERGED QUESTION
Question from anjuva : "brandnew high end Pc 125 GB Ram too slow"

tried many benchmarks wit top results, but still the PC is too slow. at ca. 30% Ram or CPU usage becomes very slow or even freezes. managed to increase the RAM use via large Fotoshop files by closing all scratchdisc options. yet it lakes too long time for fotoshop to open files

Specs?

Please stick with 1 thread, and not spam the forum
And answer the question about your full system spec

 

[anjuva]

can anyone advise me, if there is some incompatability between these parts. we exchanged the SSD to the pro version, now datatransfer is fast enough (about two GBt per seconds, previously it was up to 100 times slower!) then we discovered that two Rams had defects and recently some defective connection to an internal hardrive was found. Previously one of the thre monitors brocke dow, can it be, that there is some incompatability between this configuration, that causes all these problems or even damages some of its parts? since the mainboard has some defect -eventhough minor, because connectimg the dissappearing harddrive to a different slot in the motherboard has solved the problem and the internal Hardrive mounts again- we still consider to exchange the mainboard. has anyone a suggestion, which could be a better alternative for a motherboard more compatible with this configuration. This was configured by a company in Italy, which has never build such a Pc, and maybe they where not aware of the problems, which could arise due to conflicting parts. The Pc works now, but it seems still too slow for such a strong machiene. Fotoshop still need up to 10 seconds ore more to start, and in a new system it could open within 1-2 secnds. we need some advise by an expert. Thanks for your help. (I was not fallowing this thread for a while, because i could not enter my text. seems ok now.
- CPU Intel 19-7920x 12 core
- main board Gigabyte GA-X299 AORUS
- 128 GB RAM Ballsitix = 8x 18 GB
- SSD PCIE Samsung NVMe 960 EVO m.2 = 2x 500GB window 10 + aps
- 3x 6TB hard discs
- Video board GTX 1070 8 Gb Ram
- 750W Corsair
- windows 10 pro

 

[anjuva]

correction: the malfunktion of the slot was a connection on the motherboard. We have connected the internal harddisc to another slot and now it works. But we feel insecure to keep a motherboard , even if it has some minor defect. what would you advise? takeit easy as long as it works or exchange the motherboard: would you recomment to stay with "Gigabyte GA-X299 AORUS" (bought nov 2017) or would you advise to exchange it with something better? which motherboard would be best with least risk for conflicts with this configuration?

 

[anjuva]

MERGED QUESTION
Question from anjuva : "have a brandnew latest technology Pc and it is too slow"

I have asked a company to build a latest technology PC with 128 GB Ram. I have run many Benchmarc tests with superior scores, yet the PC is to slow even at low use of CPU and Ram. above 30-40% Ram or CPU it slows down a lot more or even freezes. we have tried hard since the last 4 Weeks dont find the problem. can you help how to diagnose the problem? Harware seems to be ok

What's your full system specs? Have you checked the hard drive? GPU usage?

MERGED QUESTION
Question from anjuva : "brandnew high end Pc 125 GB Ram too slow"

tried many benchmarks wit top results, but still the PC is too slow. at ca. 30% Ram or CPU usage becomes very slow or even freezes. managed to increase the RAM use via large Fotoshop files by closing all scratchdisc options. yet it lakes too long time for fotoshop to open files

Specs?

Please stick with 1 thread, and not spam the forum
And answer the question about your full system spec

 

[anjuva]

as previously mentioned: System specifications:
- CPU Intel 19-7920x 12 core
- main board Gigabyte GA-X299 AORUS
- 128 GB RAM Ballsitix = 8x 18 GB
- SSD PCIE Samsung NVMe 960 EVO m.2 = 2x 500GB window 10 + aps
- 3x 6TB hard discs
- Video board GTX 1070 8 Gb Ram
- 750W Corsair
- windows 10 pro

 

[bmockeg]

PCPartPicker part list / Price breakdown by merchant

Motherboard: ASRock - X299 Taichi ATX LGA2066 Motherboard ($273.98 @ Newegg)
Total: $273.98
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2018-08-30 02:19 EDT-0400