My HWMonitoring

[bubbatran209]

Windows 7 Ultimate x64
P965 DS3 rev 1.01
Intel duo 2 core E6400 overclocked 2.8ghz
Zalmon 9500A HS
4x1 gb Corsair 800mhz
Sapphire ATI HD5770
Corsair 650w psu

Does this look normal? I'm currently running prime95

The DDR Value usually stays around 2.08 & the +5v is usually at the 4.95v. Is that ok or do I have to try and fix it?

 

[CompuTronix]

37c CPU temperature is 10c too low. Should be 47c, which is 5c below the Cores @ 52c. That would be the proper 5c gradient between CPU temperature and Core temperature. A BIOS setting called PECI might be disabled, if not, then a BIOS update may correct it.

 

[bubbatran209]

37c CPU temperature is 10c too low. Should be 47c, which is 5c below the Cores @ 52c. That would be the proper 5c gradient between CPU temperature and Core temperature. A BIOS setting called PECI might be disabled, if not, then a BIOS update may correct it.

What should I set that to and how do I do a bios update? I thought the lower the temp the better.

 

[CompuTronix]

I see.

You need to learn more about the basics so that you can understand our answers without asking additional questions. I'm not willing to spend my time walking you through it. Please read the Stickies in the Overclocking > Intel Forum: http://www.tomshardware.com/forum/forum-29-347.html

Read your motherboard manual.

Use SEARCH ... you can't miss it ... top-dead center on any page.

Also, please use Google to find answers to basic questions.