Build Complete MY LITTLE GOLDEN YELLOW RYZEN BEAST

[DREDKNOT_2077]

MY FIRST RYZEN BUILD WITH POP_OS AN VMWARE WITH WIN10PRO
its done for real
(UPDATE) CUSTOM CABLES FROM CABLEMODS arrived
an installed along with the fans in this config front 3 Noctua F12 intake an the top 2 Noctua A14 exhaust on 1
Silverstone 8-Port PWM Fan Hub/Splitter
an the last Silverstone 8-Port PWM Fan Hub/Splitter & Noctua F12 on the aio is in pull config
with custom filter mesh over the aio an unused pci slot ports for good air flow an good dust control
with a brush ill touch up the yellow were i missed later
ill also update pix of setup on desk when the 2nd AOC C24G1 24.0" 1920x1080 144 Hz Monitor arrivers later this month along with exturnal burner connected the
Asus BW-16D1HT Blu-Ray/DVD/CD Writer
i might also replace the
Redragon K552 Wired Gaming as there dosent seem to be a good rgb control for it on pop_os
i might go with the CORSAIR K55 RGB PRO as thers a workable app in the pop store for the icue
............................OH AN YES I KNOW THE MONITOR IN PIX IS NOT THE AOC this my asus the i use for builds an testing the good aoc is back on the desk not the kitchen count

THE DARKBLADER X5 IS STILL IN PROGRESS MOREE LATER

benchtest an proformence run details later too

HERES LITTLE BEAST PIXS

View attachment 2514068

View attachment 2514069

View attachment 2514070

View attachment 2514071


View attachment 2514072

View attachment 2514073

View attachment 2514074
the two 120mm noctuas in this pix were replaced with the 140mm in previos pix an pulled closer
View attachment 2514076
aftermarket heatsink inplace of original the riitop houses a 2nd 500gb nvme drive (any thoghts on wheither i should run in raid mode for them)
View attachment 2514075
im going to use a brush to paint the spots i missed with spray cans a touch up the fan frames an ram heatsinks later
View attachment 2514077

 

[CountMike]

MY FIRST RYZEN BUILD WITH POP_OS AN VMWARE WITH WIN10PRO
its done for real
(UPDATE) CUSTOM CABLES FROM CABLEMODS arrived
an installed along with the fans in this config front 3 Noctua F12 intake an the top 2 Noctua A14 exhaust on 1
Silverstone 8-Port PWM Fan Hub/Splitter
an the last Silverstone 8-Port PWM Fan Hub/Splitter & Noctua F12 on the aio is in pull config
with custom filter mesh over the aio an unused pci slot ports for good air flow an good dust control
with a brush ill touch up the yellow were i missed later
ill also update pix of setup on desk when the 2nd AOC C24G1 24.0" 1920x1080 144 Hz Monitor arrivers later this month along with exturnal burner connected the
Asus BW-16D1HT Blu-Ray/DVD/CD Writer
i might also replace the
Redragon K552 Wired Gaming as there dosent seem to be a good rgb control for it on pop_os
i might go with the CORSAIR K55 RGB PRO as thers a workable app in the pop store for the icue
............................OH AN YES I KNOW THE MONITOR IN PIX IS NOT THE AOC this my asus the i use for builds an testing the good aoc is back on the desk not the kitchen count

THE DARKBLADER X5 IS STILL IN PROGRESS MOREE LATER

benchtest an proformence run details later too

HERES LITTLE BEAST PIXS

View attachment 2514068

View attachment 2514069

View attachment 2514070

View attachment 2514071


View attachment 2514072

View attachment 2514073

View attachment 2514074
the two 120mm noctuas in this pix were replaced with the 140mm in previos pix an pulled closer
View attachment 2514076
aftermarket heatsink inplace of original the riitop houses a 2nd 500gb nvme drive (any thoghts on wheither i should run in raid mode for them)
View attachment 2514075
im going to use a brush to paint the spots i missed with spray cans a touch up the fan frames an ram heatsinks later
View attachment 2514077

Nice, does it work too ?

 

[DREDKNOT_2077]

it does for the moment iv got it turned off in stand by while i sort of so issues like

my
problem i can only see easy mode an classic how do i get to advanced mode is the a keyboard shortcut button in uefi or boot up i should press

plus iv got the ARCTIC Liquid Freezer II 120 with a noctua 120mm 3000rpm fan an the aio pluged in to the cpu fan header but no read in uefi bios is it even being powered id like to run the pump at 50% an have a temp curve set to ramp when needed there only to sys fan headers on the mobo an ther pluged into a SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter each is running a set of my noctua fans should i plug the aio power into one oh them would the system then read an control it right now the system in bios only show two rpm values one for each sys fan header , if i used a fan connector splitter between the silverstone pwm control cable an the aio's an connected that to one of the sys fan headers would that then the pump an both sets of fans

an 2nd

i need to know how a step by step on how to Install Win10Pro on pop_os with vmware workstaion

ive got my system built an loaded with pop_os im about to buy win10pro an vmware Workstation 16 Player

i want to do it right anyone got a step by step instructions guild on how to do it

once all that is done ill put it on a desk an share vids an pix on proformence an desk layout also by end of june ill have the dough for 2nd monitor

 

[DREDKNOT_2077]

https://photos.app.goo.gl/8wipPG35UAMaVRwp6