Question My monitor gives a "No Signal" message despite everything being plugged in.

[sjgalaxy]

I recently built a PC and got a monitor along with it but when I plugged in the HDMI, the monitor says No Signal and I can't fix it even if i plug the cable into the motherboard or GPU. Ive tried a different cable and monitor and I still have the issue. Everything else seems fine though, the CPU and GPU fans run correctly and the LEDs in the case turn on. Is there any way for me to fix this?

 

[Phillip Corcoran]

Please post full specs of your build like so:

Motherboard
CPU
GPU
RAM
PSU
etc.

 

[sjgalaxy]

Please post full specs of your build like so:

Motherboard
CPU
GPU
RAM
PSU
etc.

Motherboard- Asus asrock b250m pro4
CPU- Intel pentium g4560
GPU- EVGA NVIDIA 1050 3gb
Ram- Ripjaw 8gb DDR4 single channel
PSU- Corsair CX 450 450 watt

 

[Phillip Corcoran]

Remove the GTX 1050, then try running monitor off the iGPU (this is just a test to establish what works).

 

[sjgalaxy]

Remove the GTX 1050, then try running monitor off the iGPU (this is just a test to establish what works).

Did not work. Also I have an Onn monitor from Walmart that has a vga port and a hdmi one if that helps.

 

[Phillip Corcoran]

Are you buy chance using any adapters with the HDMI cable?

Are you sure your GTX1050 doesn't need a 6-pin power cable connecting to it?

 

[sjgalaxy]

Are you buy chance using any adapters with the HDMI cable?

Are you sure your GTX1050 doesn't need a 6-pin power cable connecting to it?

The 1050 3gb doesn't require the 6pin cable and I'm not using any adapters.

 

[Phillip Corcoran]

Beats me then. Especially since you can't even get a monitor working through the iGPU with the graphics card removed. More experienced helper required I'm afraid because I'm out of ideas.