[SOLVED] My monitor keeps going black screen when playing games but i can still hear sound

Aug 30, 2019
3
0
10
0
Hello so when im playing games like War Thunder or World of tanks i will be playing it for a little bit and then it will just go black screen and i have to press the power button to get it to restart it anyone know whats going on ?
 
my PSU is a Ace Black 600W PSU

my ram is my full ram config is 2x 2GB and 1x4GB DDR3
As mentioned, terrible PSU that could be the root of the problem, also the RAM config you'vs specified equals to 8 GB, not 10. :/

Anyway, try using single sticks of RAM one by one, see if the issue persists of gets resolved through various combinations... Perhaps one stick is faulty or the RAM sticks are unable to work well with each other, being of different make and/or model, and generally not belonging to the same RAM kit(modules in a RAM kit are tested and assured to work together, but mixing different RAM, even of same make and model, can cause compatibility issues).
 
What about all other PC games ? Have you monitored the GPU/CPU temp value while Gaming ? Provide FULL PC specs. Which Video card is it ??

Ace Black 600W PSU
That's a poor quality generic budget PSU brand. Do not use this on any Gaming PC. This PSU might also create problem. That's not a very trustworthy GPU brand though. I would never use this unit on my PC.

-1. "Complete" system specs should ALWAYS be accompanied with any driver, hardware, or performance question. Do not post DXDiag reports as they contain a TON of useless information. Posting a DxDiag in place of a System Spec List tends to ward off potential members from helping you.

Please supply the following system details/information:

(Complete System Specs)
-CPU make and model# (clock speed/voltage, type of cooler, and "Core" temperature @ idle and load)
-Motherboard make & model# (include Bios version if graphics card is not recognized or you are having stability issues)
-RAM (amount, clock speed, model#/link of kit, configuration)
-Graphics card(s) make and model# (clock speed, voltage if modified, Driver version and GPU temp both @ idle and load)
-Power supply make,model#, "AND" age (note if using 110V or 220V A/C input)
-HDD/SSD configuration (ie: Raid setup/ back up/ OS drive/etc..)
-Case/Chasis make,model# (fan make, model#, and configuration if having thermal issues)
-Operating System (If using Windows note Framework and service pack version)
-Monitor make, model#, and resolution (If model# is unknown list resolution and refresh rate)

*If the unit is a "laptop" or "All-in-one" system you must note the make and model# of the unit. Be sure you are ALWAYS using the OEM/manufacturer's Driver updates for the unit.

*If "Crashing":
-Note the nature of the "crash" in detail, as there are several definitions for the word "crash".

*If "performance" related issue:
-Note the "exact" point in which the performance reduction occurred (ie: After Windows update, After Bios update, After Driver update, After thermal system shutdown, After Hardware change/upgrade etc...)

*For diagnostic purposes please disable the following:
-Any/all Antivirus/ Anti-malware software
-Any/all OSD monitoring software
-ALL overclocks outside of factory spec
.
 
my PSU is a Ace Black 600W PSU

my ram is my full ram config is 2x 2GB and 1x4GB DDR3
As mentioned, terrible PSU that could be the root of the problem, also the RAM config you'vs specified equals to 8 GB, not 10. :/

Anyway, try using single sticks of RAM one by one, see if the issue persists of gets resolved through various combinations... Perhaps one stick is faulty or the RAM sticks are unable to work well with each other, being of different make and/or model, and generally not belonging to the same RAM kit(modules in a RAM kit are tested and assured to work together, but mixing different RAM, even of same make and model, can cause compatibility issues).
 

ASK THE COMMUNITY