Question my monitor says no signal after moving my pc.

[KasperNeumann]

After i came home from a friend with my pc it just said no signal and i have never had a problem with that before i use a displayport cable and have a nvdia gtx 1060 and my monitor is a acer predator XB240H. hopefully i can get some help here and sorry if my english and gramma is bad

 

[jojesa]

Power off your PC.
Check that the display port cable is properly connected on both ends.
Check that the GPU is seated properly.

 

[KasperNeumann]

i tried it but it just keep saying no signal any other suggestions.

 

[jojesa]

If the computer is working properly, then check that monitor input is set to Displayport.

 

[KasperNeumann]

i checked if it was my monitor but i tested it with my laptop, i think its the pc because i connected my pc with a hdmi cable on my tv and it also says no signal.

 

[hang-the-9]

Check over all the connections in the computer, reseat RAM, power connections.

 

[Mihai395]

check all the connections, if you have same results remove each piece and put it back after that, if that doesn't work either reset the BIOS with cmos battery and the pins (before u remove the components make sure you wear rubber gloves to do not create static energy)