Question My my zotec 1050ti making my my pc not to startup properly

[Rakibul Aurnob WB]

I have switched my GPU from rx570 to gtx 1050ti 4gb (its my 5 years old gpu) as rx570 is damaged for some reason. but its not working properly, but i have also installed gt 710 and rx 450 those worked fine but the moment i installed 1050ti the pc failed to start up, it did post, cpu fan ran and all the lights lit up but it wasn't showing anything, no SSD activity, and have to force shutdown to start properly, evwn after its working properly if i restart the pc it doesn't start properly, and have to force shutdoen and turn on again. It only happens with my 1050ti.
Pc specification
Gigabyte B450M s2h
Ryzen 5 2600
16gb ram (8*2gb) (gail + xpg)
256 ssd (used as boot drive)
2tb hdd (1+1)
Corsair vs450 psu
Gpu was rx570
Duel monitor setup

 

[kurdtnz]

Did you clear the AMD drivers and install the Nvidia drivers?

 

[Rakibul Aurnob WB]

Did you clear the AMD drivers and install the Nvidia drivers?

Yes! I did. Gt 710 works fine, and 1050 was too. All its causing problem is, it doesn't turn on at 1st try, it have to be force shutdown and then turn it on again for perfect boot. Or else all it does is turns on the RGBs and cpu fan and gpu fan but the ssd process light doesn't beep and no activity

 

[logainofhades]

Not gonna lie, I wouldn't be surprised if it wasn't your PSU at fault here. The CV450 is not a high quality unit, and the RX 570 was probably too much for it.

 

[Rakibul Aurnob WB]

Not gonna lie, I wouldn't be surprised if it wasn't your PSU at fault here. The CV450 is not a high quality unit, and the RX 570 was probably too much for it.

Well, my gpu ran for 3 years without any issue, as that damaged for some reason.
But my old 1050ti isn't working properly in my pc thats what my concern is.