my new ram causing blue screen

[adriankall200]

so i got some new DDR4 RAM for my AMD Ryzen 1800x and in bios i apply the settings so the RAM is 3200MHZ cause that is the speed of my new RAM and it is AMD supported. It worsk fine untill i play games then i get blue screen/ The game crash i also ran Memtest and it failed after 5 min? what can cause this problem? i have got new RAM cause i tought the ones i bought were broken but the newest one i got also got this problem? :/ link to the RAM i got https://www.gskill.com/en/product/f4-3200c14d-16gfx

 

[misteriosly]

First try to down clock ram to 2666 or 2333 and see if its stable. If not, move the ram in other 2 slots(if u have 4 ram slots).
If you don't have 4 slots and ram still crashes after down clocking, remove CPU and carefully inspect for bent/broken pins.

 

[adriankall200]

First try to down clock ram to 2666 or 2333 and see if its stable. If not, move the ram in other 2 slots(if u have 4 ram slots).
If you don't have 4 slots and ram still crashes after down clocking, remove CPU and carefully inspect for bent/broken pins.

My old RAM is working perfectly, im currently still using them as i want to refund my other RAM. but shouldnt this kit support 3200mhz?

 

[misteriosly]

What is your Mobo model ?

 

[adriankall200]

ASUS ROG-STRIX-B350-F-GAMING/

 

[misteriosly]

Hm it seems this MB supports even higher Mhz Ram. Probably you would need to adjust voltage/timing of the ram to get it working stable.
As i said, try to down clock if its stable, ull need to adjust voltage to keep it stable. Else it is possible that ram is just incompatible with this MB.

 

[zulu1905]

dont activate xmp profile, try this settings
ram frequency =3200
Ram voltage = 1.350

(DRAM CAS Latency=14)
(Trctd=14) (Trcdwr=14)
(DRAM RAS pretime=14)
(DRAM RAS act time=34)
(Trc=48)
(TrrdS=6)
(TrrdL=8)
(Tfaw=39)
(Trfc=560)
(Trfc2=416)
(Trfc4=256)
(Gear Down Mode=Disabled)
the other settings are will be Auto.

if still not stable,
make Power Down Enable=Disable

i hope this will be help you

theese settings are only for f4-3200c14d-16gfx