My PC doesn't recognize my VGA monitor

[AnyOnePT]

Hello, i just built my PC 20 min ago, but after turning it on(all the LEDs,fans working) my monitor stays black.
PC specs:
R9 380
I5 6600k
Z170 pro gaming

 

[Wolfshadw]

Do you get an images without the graphics card installed?

-Wolf sends

 

[Dark Lord of Tech]

Is your PCIE power running to the card.

 

[logainofhades]

Are you hooked up to the graphics card's video connection, or motherboard?

 

[AnyOnePT]

I tried MOBO and GPU, none worked, i've a dvi-i to VGA converter.
I just tried connecting to my television with HDMI and it didnt display image

 

[logainofhades]

What power supply did you use, for this build?

 

[AnyOnePT]

750watts bronze 80+

 

[logainofhades]

Make/model? Wattage and efficiency rating don't mean much. It could be a 750w, rated at 80+ gold, and still be best used a a doorstop.

 

[AnyOnePT]

I think its evga nex 750w i domt havê the box anymorr.
Any chances its a broken CPU?

 

[Wolfshadw]

I tried MOBO and GPU, none worked, i've a dvi-i to VGA converter.
I just tried connecting to my television with HDMI and it didnt display image

You never really answered my question. With the graphics card removed, do you get a display from the integrated graphics on the motherboard?

-Wolf sends

 

[AnyOnePT]

Still doesn't work, by removing the GPU.
All the displays detect my PC, but it wont display image.


Could a bent pin on the CPU or missplaced be the cause?

 

[Wolfshadw]

There are lots of possible causes, but not getting a display from the integrated graphics when the discrete graphics card has been removed removes the graphics card and power supply as probably culprits.

Yes, if you do have bent pins, that could cause the system to fail to boot.

-Wolf sends

 

[AnyOnePT]

If i do havê bent pins what should i do to fix it?

 

[AnyOnePT]

I just opened to check and CPU is intacta só it eeems but, motherboard hás 2 thingies that dont look like the others in the middle, they look like mini generators. http://postimg.org/image/a70ff8kkl/

 

[James Mason]

No, those two odd ones are supposed to be there:
http://images.anandtech.com/doci/9485/Z170%20Pro%20Gaming_01.jpg

It doesn't look like any pins are bents. But it could be your mobo is just DOA: http://www.newegg.com/Product/Product.aspx?Item=N82E16813132567
It seems common enough it could happen to you.

 

[AnyOnePT]

So what should i do? Should i put it on a store to try repair or fins the problemas stil?

 

[JasonL265]

I have built two PC that didn't boot at first.

For the first PC, the RAMs weren't inserted all the way, I removed them and inserted them all the way and it worked. Check to make sure that all your RAM sticks are really in there. Also make sure that the 8pin is plugged in and the 24 pin is also plugged in.

For the second PC, i had a dead CPU or MOBO, went back to Micro Center to have it exchanged and after reinstalling everything, it worked.

Hopefully you can get it to work without having to get it exchanged.

 

[AnyOnePT]

How did you knew they were dead?

 

[JasonL265]

How did you knew they were dead?

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

Try following these steps to get your PC to post. if it doesn't, then chances are you have a DOA cpu/mobo/psu

I installed the MOBO speakers and there weren't any beeps so that was kinda a dead givaway.