Hi,
As the title says, I've recently upgraded my RAM and my power supply on my PC.
(1×8) ADATA XPG DDR4 AX4U213338G15-SBF
Xigmatek X-calibre XCP-A500, 500W
To:
(2×8) Corsair vengeance LPX DDR4 2400MHz
EVGA 100-w1–0500-kr 500W
After the upgrade, when I turn on my PC, the fans are working correctly and the leds turn on too, but my monitors, mouse, keyboard and headphones doesn't turn on. I don't even reach to the BIOS. After ~10 seconds, the PC turn off but then after ~5 seconds, it turns on again by itself. And it seem doing that endlessly.
Yes, It happened before since day 1 of my PC. Occasionally it happens but after tine 3th to 8th time it boots correctly and works perfectly. The majority of times, it's boots at the first and less frequently, it boots on first try but with a blue screen of "It didn't boot correctly or something like that" with the options;
Continue, exit and continue to win 10
Use a drive
Troubleshoot
Turn off your PC
And then it boot at right after it or it keep restarting again and the it boots.
I thought that doing that update, it would be fixed. But now I can't start my PC. I'm thinking that it's maybe the RAM because it react like if there wasn't any. I've tried with only one stick, the old one, the second one, remove it and then putting back. It keep doing the same thing.
Thanks for the help and by reaching this point!
Specs:
(Well you know the RAM and the power supply)
GA-H110M-S2PV (DDR4)
intel core i5 7500
GTX 1050ti
WD Blue SSD 500GB
(And 3 other HDD that I don't remember their models, one it's segate 1T, and two WD blue 500GB and 250GB I think)
As the title says, I've recently upgraded my RAM and my power supply on my PC.
(1×8) ADATA XPG DDR4 AX4U213338G15-SBF
Xigmatek X-calibre XCP-A500, 500W
To:
(2×8) Corsair vengeance LPX DDR4 2400MHz
EVGA 100-w1–0500-kr 500W
After the upgrade, when I turn on my PC, the fans are working correctly and the leds turn on too, but my monitors, mouse, keyboard and headphones doesn't turn on. I don't even reach to the BIOS. After ~10 seconds, the PC turn off but then after ~5 seconds, it turns on again by itself. And it seem doing that endlessly.
Yes, It happened before since day 1 of my PC. Occasionally it happens but after tine 3th to 8th time it boots correctly and works perfectly. The majority of times, it's boots at the first and less frequently, it boots on first try but with a blue screen of "It didn't boot correctly or something like that" with the options;
Continue, exit and continue to win 10
Use a drive
Troubleshoot
Turn off your PC
And then it boot at right after it or it keep restarting again and the it boots.
I thought that doing that update, it would be fixed. But now I can't start my PC. I'm thinking that it's maybe the RAM because it react like if there wasn't any. I've tried with only one stick, the old one, the second one, remove it and then putting back. It keep doing the same thing.
Thanks for the help and by reaching this point!
Specs:
(Well you know the RAM and the power supply)
GA-H110M-S2PV (DDR4)
intel core i5 7500
GTX 1050ti
WD Blue SSD 500GB
(And 3 other HDD that I don't remember their models, one it's segate 1T, and two WD blue 500GB and 250GB I think)