My PC SHOWS NO SIGN OF LIFE PLEASE HELP

[Jeremylittlemars]

I'm sure i plugged the power,HDD, and reset buttons in the right place but nothing happens when i try to power it on i checked every troubleshooting list it shows no LED no fans moving nothing i have no money to buy any new parts or pay for shipping back to newegg is there anyone who can help me??

 

[Faux_Grey]

Perhaps try unplugging things that aren't important?

Remove GPU, hard drives, RAM, then try power it on.

Make absolutely sure that the power button is correctly plugged into the motherboard.

Most motherboards have standby LEDs on them somewhere, and should light up if power is supplied from the PSU, perhaps list what hardware you have?

 

[Jeremylittlemars]

Perhaps try unplugging things that aren't important?

Remove GPU, hard drives, RAM, then try power it on.

Make absolutely sure that the power button is correctly plugged into the motherboard.

Most motherboards have standby LEDs on them somewhere, and should light up if power is supplied from the PSU, perhaps list what hardware you have?

 

[Jeremylittlemars]

DIYPC D480-W White Dual USB 3.0 ATX Mid Tower Gaming Computer Case with Build-in 5 x Fans (2 x 120mm Blue LED Fan x Front, 1 x 120mm Blue LED Fan x rear, 2 x 120mm Fan x top), Fan Controller

EVGA 500 W1 100-W1-0500-KR 80+ WHITE 500W Power Supply

HyperX Fury Red Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model HX316C10FRK2/8

AMD FX-6300 Vishera 6-Core 3.5 GHz (4.1 GHz Turbo) Socket AM3+ 95W FD6300WMHKBOX Desktop Processor

EVGA GeForce GTX 950 DirectX 12 02G-P4-1953-KR 2GB 128-Bit GDDR5 PCI Express 3.0 x16 SLI Support Video Card

Samsung 120GB 750 EVO SSD SATA III 2.5" MZ-750120BW

MSI 760GMA-P34 (FX) AM3+ AMD 760G SATA 6Gb/s USB 3.0 Micro ATX AMD Motherboard

WD Blue 1TB Desktop Hard Disk Drive - 7200 RPM SATA 6Gb/s 64MB Cache 3.5 Inch - WD10EZEX - OEM


I also unplugged everything and tried to do a test outside of the case i thing the the MOBO is the problem

 

[James Mason]

Did you flip the switch on the PSU to the on position?

Did you connect both the 24 pin and 4 pin motherboard power connectors?

 

[Jeremylittlemars]

Yes

 

[James Mason]

https://www.youtube.com/watch?v=G4FOBL1c3pA

 

[Jeremylittlemars]

The problem was i didn't plug it in the JPF1 and 2 pin i was plugging it into something that looked like the jpf pins but i couldn't read the words on the MOZBO so couldn't tell the diffrence. Note to self always get to know the MOBO before you start building

 

[James Mason]

The manuals have diagrams that can take some study to get a handle of the orientation.