Question My pc won’t boot after changing to water cooling

[Erelski]

My pc won’t boot after changing to water cooling + replacing ram, no power at all no lights, fans not spinning at all. I don’t know why pretty sure everything is installed fine, everything is working fine before i change it to water cooling and all, any fix or solutions? Pc is 3 months old

Ryzen 3 2200g
Gigabyte a320
Corsair vengeance pro 8x2 3000mhz
80+ 500w psu

 

[ElectrO_90]

Check all cables are plugged in correctly
remove the watercooler and put the old one back and see if it boots.
strip it down to bare minimum, CPU and 1 Ram stick

 

[Lutfij]

You should ideally list your specs like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

You should also add the make and model of the PSU as opposed to just it's wattage. The other matter is the make and model of your watercooler, if it's an AIO or a custom kit. Often times, a backplate that has been tighten too much can cause the system to not boot.

 

[Erelski]

Check all cables are plugged in correctly
remove the watercooler and put the old one back and see if it boots.
strip it down to bare minimum, CPU and 1 Ram stick

Hi, i tried powering my psu alone and it worked, problem is ram stick is not lighting or working

 

[Erelski]

You should ideally list your specs like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

You should also add the make and model of the PSU as opposed to just it's wattage. The other matter is the make and model of your watercooler, if it's an AIO or a custom kit. Often times, a backplate that has been tighten too much can cause the system to not boot.

Hi, computer turned on power, but my ram stick doesn’t light up is there a chance that the Mobo has been broken?

 

[ElectrO_90]

yes, you could have cracked the solder if you pushed down too hard on the motherboard when it was in the case.