My pc wont boot :(

[gigshoho]

Hello, so i have a one month old computer (bought it all brand new). Ive been using it since i bought it and it works perfectly fine, 2 days ago turned it on and tried to update my apu driver (im using ryzen 5 2400g with asrock b350m pro4 mobo) i clicked the update on the radeon software and i was just waiting to finish the download the monitor turned black and says no signal detected. Keyboard and mouse has no light at all but the system unit is still on. I waited for like 10min still no display so i forcibly turn off the unit. Tried to turn it on but it the lights on my system unit flash like the fans spins for like a sec or two and it turned off automatically. I tried to re-seat the ram and turned it on but nothing happens. Also tried insert my rams to other slot and still nothing. I dont have any idea whats going on so i unplug the power cord from my psu, press the power button for 30sec, plug it in and press the power btn again but nothing change. So i tried to unplug the power cord again, remove the cmos battery, wait for a minute then put it back, connect the plug and press the power button, all the fans are spinning, (intake, exhaust and cpu fan) but my ram has no light or something (im currently using rgb ram) and it wont boot. And i notice that the fan lights are like blinking when it should be steady/idle. I tried everything i have read here but nothing help or maybe idk what im doing lol.

I also tried to turn it on using a flat screw driver, i dont know what its called but still the same, fans are spinning, my ram has no light, it wont boot, and fan lights just blinking.

Please help thank you.

PS: my pc was working in the morning, shut it down and this happen around afternoon same day.

Specs are:

Ryzen 5 2400g
Asrock ab350m Pro4
Team elite delta rgb 8gb (2x4) 2666mhz
120gb wd green ssd
1tb hdd
seasonic m12ii 620w
cooler master masterbox 3.1 lite

 

[R_1]

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
go down the list it covers many issues.
step 17 is there a speaker connected to the front panel connector.

canned diagnostic speaker rant
The diagnostic speaker is the motherboards main diag feedback device.
the motherboard may be telling you where the problem is.
my speakers have this plug
http://images.crutchfieldonline.com/graphics/infolib/homelib/hSpeakerSpringClip.jpg
I use lamp wire but any stranded wire will do. literally any stranded wires. strip one end like so
http://www.antiquelampco.com/Shades/CordColors.jpg
attach the stripped end into the speaker spring clips on the speaker.
the other end of the wire should be trimmed like so the semi strip
https://wesbellwireandcable.com/images/cutwire.png
by doing a semi strip the wire case is now the socket.
plug one wire to the first pin, and the second onto the fourth pin.
power on the system and listen for beeps
end canned rant

and for good measure a refresh on grounding

Canned Grounding Rant-
shut down system and remove side panel. with the power cable plugged into the PSU touch a bare unpainted metal area of the case. (my favorite spot is an unpainted screw securing the PSU) once you have grounded yourself you can unplug the computers power cable from the PSU and can touch the system.
if you move your feet, or shuffle in your chair, plug in the cord, reground yourself and unplug again.
end canned rant-

 

[gigshoho]

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
go down the list it covers many issues.
step 17 is there a speaker connected to the front panel connector.

canned diagnostic speaker rant
The diagnostic speaker is the motherboards main diag feedback device.
the motherboard may be telling you where the problem is.
my speakers have this plug
http://images.crutchfieldonline.com/graphics/infolib/homelib/hSpeakerSpringClip.jpg
I use lamp wire but any stranded wire will do. literally any stranded wires. strip one end like so
http://www.antiquelampco.com/Shades/CordColors.jpg
attach the stripped end into the speaker spring clips on the speaker.
the other end of the wire should be trimmed like so the semi strip
https://wesbellwireandcable.com/images/cutwire.png
by doing a semi strip the wire case is now the socket.
plug one wire to the first pin, and the second onto the fourth pin.
power on the system and listen for beeps
end canned rant

and for good measure a refresh on grounding

Canned Grounding Rant-
shut down system and remove side panel. with the power cable plugged into the PSU touch a bare unpainted metal area of the case. (my favorite spot is an unpainted screw securing the PSU) once you have grounded yourself you can unplug the computers power cable from the PSU and can touch the system.
if you move your feet, or shuffle in your chair, plug in the cord, reground yourself and unplug again.
end canned rant-

Ive read that here in the forum and my pc works perfectly fine. Idk whats the problem. I cant tell because my motherboard seems have no speaker. Whenever i turn it on without ram, it has no beep sounds. It just the fans with lights are blinking and spinning and the cpu fan too.

 

[R_1]

https://www.amazon.com/Home-Mart-Computer-Mainboard-Speaker/dp/B07498PBVK/ref=sr_1_2?s=electronics&ie=UTF8&qid=1539633423&sr=1-2&keywords=motherboard+speaker

no speaker no beep. speaker needed for testing motherboard, and for the motherboard to tell you what failed the Power On Self Test or POST

 

[gigshoho]

https://www.amazon.com/Home-Mart-Computer-Mainboard-Speaker/dp/B07498PBVK/ref=sr_1_2?s=electronics&ie=UTF8&qid=1539633423&sr=1-2&keywords=motherboard+speaker

no speaker no beep. speaker needed for testing motherboard, and for the motherboard to tell you what failed the Power On Self Test or POST

I see. I guess i have to bring my system unit to the shop where i bought it. Thank you so much