[SOLVED] My Ram supported ECC and Registred But Motherboard Non ECC

[benyaminjj]

I bought RAM (Vengeance LPX 2400MHZ DDR4 8GIGx2) and it will get tomorrow
Ram supported ECC and Registred But My Motherboard B360 HD3 Rev.1.0 Dual Channel Non-ECC Unbuffered DDR4

Will my motherboard recognize it?
no problem for run?

 

[anotherdrew]

Per Gigabyte B360 HD3 MB (I'm assuming that is your board) memory specs:

1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
2. Support for DDR4 2666/2400/2133 MHz memory modules
3. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
4. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

So, sounds like it will work (in non-ECC mode). BTW, you have a link to the memory you bought? I thought Corsair Vengeance LPX was normally non-ECC.

 

[benyaminjj]

https://www.corsair.com/eu/en/Categ...y-Kit---Red/p/CMK8GX4M1A2400C16R#tab-overview

 

[Calvin7]

The link above is to a 8GB Kit (1 x 8GB).

You seem to be buying two. Memory modules sold as Single modules have no guarantee to be compatible together if used in multiples.

You wrote, "Ram supported ECC and Registred...". That makes no sense to me.

 

[benyaminjj]

Their timing is exactly the same and both cl16
That site wrote : Memory Configuration Dual Channel
Yes you are right..Corsair Not at all haven't RAM ECC