My ryzen user experience has been the worst.
Since I want an upgrade for 3d modeling and rendering I purchased the ryzen 2700x.
At first I was stupid enough to ignore the warnings about the ram and bought this config.
2700x
asrock fatality motherboard
corsair 3200 mhz ram (incompatible)
gtx 1080 ti
1000 watt psu.
ssd and hard drives.
It worked the first time, I played some games then tried to overclock the ram.
I just ran the x.m.p 2 profile many times, some worked for a while then it suddenly crashed, others just stop posting altogether. I DID NOT TOUCH THE VOLTAGE.
So i left it at "stable" 2666 mhz.Windows crashed, then I tried to boot again and the motherboard would not post.
It used to cycle between processes and one memory error until it stopped at error 90.
I tried to reset the cmos for week but nothing would work. I was incredibly fed up with this error that i decided to buy a more expensive motherboard, an asus x470 motherboard.
I bought some new ram that is compatible with the new asus motherboard.
Today I tried to put it all together and it still would not boot.
I dont think is related but the asus motherboard debugg tells me that its a VGA Card problem, I switched the card but nothing happened.
Now I have two motherboards and two differents sets of ram that I need to return. This has been a painful process and I really dont know what to do.
The new ram is in the compatibility list of the asus motherboard. WTF.
My cpu seems fine, no visible damage not even in the pins.
My drives work fine but the pc would not even post.
I tried putting my ram in other slots, I think my cpu got damaged by using it for 4 hours the first time I turned on the system.
When it worked cpu temps were fine.
What should I do? Go for intel? Replace my 2700x?
Since I want an upgrade for 3d modeling and rendering I purchased the ryzen 2700x.
At first I was stupid enough to ignore the warnings about the ram and bought this config.
2700x
asrock fatality motherboard
corsair 3200 mhz ram (incompatible)
gtx 1080 ti
1000 watt psu.
ssd and hard drives.
It worked the first time, I played some games then tried to overclock the ram.
I just ran the x.m.p 2 profile many times, some worked for a while then it suddenly crashed, others just stop posting altogether. I DID NOT TOUCH THE VOLTAGE.
So i left it at "stable" 2666 mhz.Windows crashed, then I tried to boot again and the motherboard would not post.
It used to cycle between processes and one memory error until it stopped at error 90.
I tried to reset the cmos for week but nothing would work. I was incredibly fed up with this error that i decided to buy a more expensive motherboard, an asus x470 motherboard.
I bought some new ram that is compatible with the new asus motherboard.
Today I tried to put it all together and it still would not boot.
I dont think is related but the asus motherboard debugg tells me that its a VGA Card problem, I switched the card but nothing happened.
Now I have two motherboards and two differents sets of ram that I need to return. This has been a painful process and I really dont know what to do.
The new ram is in the compatibility list of the asus motherboard. WTF.
My cpu seems fine, no visible damage not even in the pins.
My drives work fine but the pc would not even post.
I tried putting my ram in other slots, I think my cpu got damaged by using it for 4 hours the first time I turned on the system.
When it worked cpu temps were fine.
What should I do? Go for intel? Replace my 2700x?