My Self-Built Computer is in a Boot-Loop and the peripherals don't work

[Crowley_Astray]

Hello everyone!

I am having quite the problems here and don't know what to do anymore.
Basically, I built my PC, did everything exactly as asked of me in the manuals and now that I try to turn it on, it is in a constant boot-loop (leds and fans turn on for a few seconds, turn off again and then start anew) and NO peripherals seem to work AT ALL. So no light on the keyboard, no signal on the monitor...

I already did everything that was asked of me in the Thread dedicated to these sort of things on this website, however it didn't work.

I have no way of checking if my PSU works either.

I'd really appreaciate any help as I am really desperate already

My Components:
CPU-Fan: Be Quiet! Pure Rock
CPU: Intel-Core i5 6600K
PSU: Seasonic M12II-850 Bronze EVO Edition 850W ATX 2.3
Case: Phanteks Enthoo Pro M
Graphic: Sapphire Radeon RX 480
HDD: http://geizhals.at/seagate-desktop-hdd-2tb-st2000dm001-a686483.html
SSD: Toshiba OCZ TR150
RAM: 2xKingston GB
Motherboard: Gigabyte GA-Z170-Gaming K3-EU

Have a nice day
~Crowley

 

[alexoiu]

Hi, Make sure that the 8 pin power cable is connected to the motherboard. If it is, try removing all RAMs and starting the board. See if same loop.

 

[TheTurtleTitan]

Take out your ram sticks and stick them in the two other slots, this happened to me once and this fixed it, which means that one or two of the ram slots are faulty.

 

[Crowley_Astray]

Hi, Make sure that the 8 pin power cable is connected to the motherboard. If it is, try removing all RAMs and starting the board. See if same loop.

Take out your ram sticks and stick them in the two other slots, this happened to me once and this fixed it, which means that one or two of the ram slots are faulty.

I did as you said and still the same loop. On monday someone comes over to check out the PSU and whether it's faulty. Thanks for your replies

 

[JettVic]

Hello everyone!

I am having quite the problems here and don't know what to do anymore.
Basically, I built my PC, did everything exactly as asked of me in the manuals and now that I try to turn it on, it is in a constant boot-loop (leds and fans turn on for a few seconds, turn off again and then start anew) and NO peripherals seem to work AT ALL. So no light on the keyboard, no signal on the monitor...

I already did everything that was asked of me in the Thread dedicated to these sort of things on this website, however it didn't work.

I have no way of checking if my PSU works either.

I'd really appreaciate any help as I am really desperate already

My Components:
CPU-Fan: Be Quiet! Pure Rock
CPU: Intel-Core i5 6600K
PSU: Seasonic M12II-850 Bronze EVO Edition 850W ATX 2.3
Case: Phanteks Enthoo Pro M
Graphic: Sapphire Radeon RX 480
HDD: http://geizhals.at/seagate-desktop-hdd-2tb-st2000dm001-a686483.html
SSD: Toshiba OCZ TR150
RAM: 2xKingston GB
Motherboard: Gigabyte GA-Z170-Gaming K3-EU

Have a nice day
~Crowley

You're sending power out because the computer is trying to boot, so that's plausible, it could be, mostly all the time it is, a bad ram, did you take a stick out and try booting it then?