Question My system with following config not giving video output

thegodofwar2501

Reputable
Mar 11, 2016
2
0
4,510
0
Well i had previously r9 390 sapphire.. fx 6300 and gigabyte mobo. Antec vp 650 p v2.
I purchased i5 9400f and gigabyte 360m d3h. Ram 8gb corsair vengence and WD green 240gb ssd.The display via gfx was going through .i managed to install win 7,then issue came pc hang. I tried restarted but no display came. After few min restarted display came through. For curiosity Changed gfx card to r5 230. Still no success. Changed procesor to i3 8100. It worked.i dont knw if it was fluke or stable start up.. i managed to flash bios f13 on mobo which was f12 previously and also installed wind 10 . Tried couple of restart all time display worked. Now i put my orignal gfx card it gave display. I switched it off restarted twice to cnfrm.it worked. But after final wind up and arranging my wires inside cabinet and after final lock down of cabinet the display did not go through.i am stumped.hopeless.
 

ASK THE COMMUNITY

TRENDING THREADS