NEC Ready 9905 Drivers

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

Anyone know what oem hardware was installed in this machine. I need
drivers for modem, video, & sound. ID 845127102. TIA. hw
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

There is an option to search by keyword on priorityonesupport
Here is just one search
As of January 1, 2000 - Packard Bell NEC Inc, stopped manufacturing
and selling products in the US. As a courtesy, customer service and support
for the US have been redirected to indepently owned Priority ONE Support.
Your computer uses the 872 motherboard and the following information applies
to its components: 872 Motherboard Overview Battery Lithium 3V BIOS Intel®
E28F002BXT80 2 MBit Flash EPROM System BIOS by Phoenix Bus PCI/ISA based
system bus (PCI 2.1 compliant) 100MHz maximum bus speed Cache 32K level 1
cache Pentium II - 512KB level 2 cache in the Single Edge Contact cartridge
Celeron - 0 or 128KB level 2 cache Chipset Intel® 82440BX PCI AGP Controller
(PAC) Intel® 82371EB PCI chipset (PllX4E) CPU This motherboard supports the
following CPUs: Celeron 266/66, 300/66 Mendicino 300/66, 333/66 PentiumTII
233/66, 266/66, 300/66 Deschutes 266/66, 333/66, 350/100, 400/100
PentiumTIII 450/100, 500/100 I/O SMC FDC37M707 Super I/O Controller
Interfaces 2 DB-9 Serial ports 1 DB-25 Parallel port 1 PS/2 keyboard port 1
PS/2 mouse port 2 USB connectors 1 DB-15 MIDI/Game port(Optional) 3 Stereo
mini-jacks for Line In, Line Out & Mic (Optional) RAM 3 3.3V 168-pin DIMM
sockets, upgradeable to 768MB total SDRAM Video Options No on-board video
Audio Options Crystal Semiconductor CS4297 Audio Codec (optional) Yamaha
DS1-L PCI Accelerator (optional) Applicable Part Numbers 182461, 182461-01,
151-00019-000 Other components are as follows: 081942 IC CPU PII 350 MHz MMX
BO 512 SL 2U3/Q559 1 081919 IC DIMM 64MB SDRAM100MHz 8MX64 NON-PARITY
PROJ:BOSTON 1 235-00006 BAR TOP HEATSINK 2 090319 MODM 100 GEN PCI 56K FX/DT
GVC MODM 100G 56K PCI FAX/DATA GVC 1 060235 CRD VDO AGP 4MB SDRAM 2D/3D RAGE
IIC MINDEN 1 730337-01 CDR 32X MST WHT LTN-301 LITEON 1 160423 MOUSE
INTELLIMOUSE V1.1A PS/2 MS# 673-00189 MW W/NEC LOGO 1 130074 CVR DUMMY
F/5.25 FDD MST WHT PROJ:MTATX FCLFT 1 130074 CVR DUMMY F/5.25 FDD MST WHT
PROJ:MTATX FCLFT 1 160421 MIC PB GOLDTRON LC MST/WHT 1 229-00012 KYBD ERGO
(MIST WHT)PEABODY 1 Yes 130398 SCREW #6-32X35MM WSHR SHLDR COOPER COLOR
F/MNTNG LS120 DRV 1 130397-01 BTTN ASSY EJCT F/FD(LS120 DRV) 1 130359 BTTN
FLOPPY MINI TOWER HAWAII PRJ:890632 VNDR:GVC 1 130425 SCREW M3X4.5L SELF
TAPPING 1 320715 FD (D359M3)MIST WHITE P4 PROJ:MITSUMI 3.5' FDD 1 510-00023
RUBBER FEET CKT #AR-128 1 300881 HD 8.4GB(MPC3084AT)UDMA'PB 12' FUJITSU 1
182461-01 MBI 872 ATX SE440BX-2 SEATTLE2 W/AUDIO YAMAHA DS1-L 1
252-00007-000 HDW RETENTION MCHNSM AMP F/PII CELERON AND KITMAI CPUs 2
320722-02 FD 3.5'(LS-120-G3)BZLESS F/P5 1 050-00096-001 ACCY KIT SPKR ORCA
L/R 6W NEC RETAIL MST WHT N/LOGO 1 Should you have any further questions or
require clarification, please email us again or contact Priority One Support
at (888) 728-3388 or (900) 555-3388. Thank you for using Tech Forum. CLINT,
Employee #3132
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

On Tue, 29 Jun 2004 03:44:37 GMT, housewolf <housewolf@budweiser.com> had this to say and I had to
reply to it:

::Anyone know what oem hardware was installed in this machine. I need
::drivers for modem, video, & sound. ID 845127102. TIA. hw


Unfortunately, this group is Packard Bell and although NEC bought out the old Packard Bell
corporation I am not sure if many folks here know or have that type of information. You could try
http://www.nec.com and see if they list it. You may even be able to try Priority One Support which
handles the Packard Bell systems http://www.priorityonesupport.com or as a last resort you can try
the search engine at http://www.google.com which came back with this:
http://support.necsam.com/downloads/search/default.htm?CIRestriction=454

It has a searchable box which may help you. You can also try http://www.driversguide.com you have
to sign up (free) and it also has a searchable database.

I Hope I helped?

Elector
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

I did a bit of research and posted there (no reply). I did get some
info out of the archives, some conflicting. I'll use the trial and
error method. Unfortunatly the machine is not at my home but my
mothers. Thanks again. hw
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

"housewolf" <housewolf@budweiser.com> wrote in message
news:6aq3e019dsqklg12vd21g052cvrl4btgpb@4ax.com...
> I did a bit of research and posted there (no reply). I did get some
> info out of the archives, some conflicting. I'll use the trial and
> error method. Unfortunatly the machine is not at my home but my
> mothers. Thanks again. hw

Your more than welcome.

Elector
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

I have a recovery cd that came with the ready 9905 series from NEC. Send
me an email and I can get you a copy of it if you haven't already given
up.
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

Would it be possible for you to determine the path on the NEC Ready 9905
Recovery CD that will start a full restore with format? Mine will not
show the start menu.
I've tried several executable files, but they don't do the trick.
Thanks.
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

"BHH2" <barb@nospam.com> wrote in message
news:8e192a43061656c66bbf62f82566e6d6@localhost.talkaboutcomputing.com...
> Would it be possible for you to determine the path on the NEC Ready 9905
> Recovery CD that will start a full restore with format? Mine will not
> show the start menu.
> I've tried several executable files, but they don't do the trick.
> Thanks.
>

It used to be Y:/ but Simon may have an answer for you or even Ben since I
have not restored a PB for quite some time.

Elector
 
Archived from groups: alt.sys.pc-clone.packardbell (More info?)

It is possible
tell me the name of the folders you see on the Cd under Windows
do you have one called dos menue
or something like tschmenue
What is the number on the Master CD may just be able to cross reference it

I am not familar with that unit
Will it boot from the master cd
Do you have any other software that came with the unit
Back to Ebay
"Elector" <elector@my-deja.com> wrote in message
news:S34rd.1964$zK1.1735@trndny05...
>
> "BHH2" <barb@nospam.com> wrote in message
> news:8e192a43061656c66bbf62f82566e6d6@localhost.talkaboutcomputing.com...
>> Would it be possible for you to determine the path on the NEC Ready 9905
>> Recovery CD that will start a full restore with format? Mine will not
>> show the start menu.
>> I've tried several executable files, but they don't do the trick.
>> Thanks.
>>
>
> It used to be Y:/ but Simon may have an answer for you or even Ben since
> I have not restored a PB for quite some time.
>
> Elector
>
>
 
Marcie, My name is Mike and I need a copy of the Ready 9905 Recovery CD as well. I tried to email you to ask you for a copy through the site but it says your email is not subscribed. Please tell me what I need to do to contact you to get the cd. Thank you.
Mike
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom