Question Need 2U case/chassis with generic PCIe riser (for horizontal full height card)

sunsanvil

Distinguished
Feb 22, 2010
49
0
18,530
0
I've been asked to put together a rackmount system with some pretty specific requirements.
  • Has to be 2U.
  • Must be standard ATX board compatible
  • Must include a passive standard PCIe riser for either 2 full height cards, OR 1 full height + 1 half height.
I looked through all of SuperMicro's stuff but anything 2U with full height slots is proprietary mainboard/riser only.

Only thing I've found which comes close is PlinkUSA but their 2 or 3 slot riser uses little extender boards in the top slot which arnt going to support a heavy card well enough.

Any suggestions would be much appreciated.
 

Similar threads


ASK THE COMMUNITY

TRENDING THREADS