Need a good UPS for a 550 W computer PSU.

Status
Not open for further replies.

captaincandellight

Distinguished
Oct 10, 2013
106
0
18,680
I need a UPS for my new 550 W computer power supply. Do you know which UPS will be best for a 550W computer power supply. Nothing very expensive either. I just want a UPS that can keep my computer powered on for 10 to 15 minutes til I shut it down during a power outage in my locality. Please let me know. Thank You.
 
Solution
You only need the PC and the monitor connected to the battery backed sockets since they are the only critical components needed to confirm a proper shutdown during a power interruption event. The total power consumption of those two components should be less than 200 Watts if your system is the Dell Inspiron 545 configured as shown in your sig.

The SilverStone Strider Gold series 550W (ST55F-G) is made by Enhance Electronics. Its APFC circuit should have no problems operating on a UPS that outputs a Stepped Sine Wave when operating on battery backup power.
A 550W PSU doesn't mean your system will draw that much power from the UPS; please provide a list of components including external devices like the monitor that will also be connected to the UPS. What's your budget and are you looking for a pure sine wave unit (much better for the PSU)?

Edit: Bumping is not allowed in this newsgroup.
 
There is a Dell IN1910N flat panel monitor, a Canon pixma mp480 printer cum scanner and Dell AY410 speakers connected as peripherals to the computer. My budget is $128. I want something that will be the best fit for my new Silverstone ST55F-G 550W power supply . If a pure sine wave unit is much better for the PSU then for sure I want to go for it. Thank You.
 
These are becoming too expensive more than $200 with shipping as I live outside the USA in India. Can you please tell me if this a good UPS and also does it have pure sine wave - APC Back-UPS RS, 1000VA, 230V. It is a 600W UPS from APC. This is available locally to me. "Thank You very much".
 


APC Back-UPS RS, 1000VA, 230V, INDIA

On-battery Waveshape: Stepped Sine Wave
 
I presumed you were in North America because your budget is in dollars.

That UPS is not bad (I prefer the more expensive Smart-US), but it provides Stepped Sine Wave while on battery. Since you didn't provide a list of components, I can't verify if your PSU is compatible with that UPS.
 
You only need the PC and the monitor connected to the battery backed sockets since they are the only critical components needed to confirm a proper shutdown during a power interruption event. The total power consumption of those two components should be less than 200 Watts if your system is the Dell Inspiron 545 configured as shown in your sig.

The SilverStone Strider Gold series 550W (ST55F-G) is made by Enhance Electronics. Its APFC circuit should have no problems operating on a UPS that outputs a Stepped Sine Wave when operating on battery backup power.
 
Solution
Thank You very much.

How are these APC uninterrupted power supplies
a) APC Power-Saving Back-UPS Pro 1000 with LCD, 230V and

b) APC POWER-SAVING BACK-UPS PRO 1000VA WITH LCD WITHOUT BATTERY, 230V.

They are 600W. Will this be sufficient for my SilverStone Strider Gold series 550W (ST55F-G) power supply and my Dell Inspiron 545 configuration. I also have the following peripherals.

1) Dell IN1910N flat panel monitor,
2) Canon pixma mp480 printer cum scanner and
3) Dell AY410 speakers.

Please do pour your knowledge on it. Thank You very much.
 


An online (a.k.a. double-conversion) UPS is more expensive than a line-interactive UPS due to the more robust AC-to-DC battery-charger/rectifier circuit needed for that topology.

You were already complaining about budget.
 


It should work based on your system's power consumption requirements.

As always, no PSU or UPS manufacturer will guarantee compatibility. They will always recommend that you test the combination to make sure that it works for your specific configuration.
 
I will have the monitor and the PC plugged in to a surge protector with all the other peripherals speakers and printer also plugged in to it. Then have the surge protector plugged in to the UPS. Is this configuration proper. Please do let me know. Thank You very much.
 
It probably wasn't crappy, but it most likely was underpowered for your requirements. What do you mean by "The PC would only go in sleep mode when not in use"? The UPS shouldn't affect the PC at all; it's sole purpose is to protect it and provide power if there's an outage.
 
Status
Not open for further replies.