[SOLVED] Need a short ITX Case to fit in shelf.

[markc1999]

I need under 11" tall and maybe 9"ish wide. Length is less important.
I have an ASRock Z390 ITX mobo
RTX 2070 Super GPU
Seasonic FOCUS PX-750 power supply
Noctua NH-L12S CPU cooler

Any suggestions?

 

[Barty1884]

Is 'under' 11" firm?
CM Elite 110 is 11.1" in height - and the rest check out....
https://www.coolermaster.com/catalog/cases/mini-itx/elite110/#specifications

https://pcpartpicker.com/product/QCjG3C/cooler-master-case-rc110kkn2

Although I'm not sure you'll fit the cooler & an ATX PSU.

 

[markc1999]

what (affordable) replacement PSU would u recommend that could handle that GPU etc? oh it's a i9-9900 65W CPU

 

[Barty1884]

An SFX unit would give you much more room to work with in the Elite 110. To handle a 9900 and 2070, absolute minimum would be 550W, 650w gives you some good headroom...

https://pcpartpicker.com/products/compare/mPdxFT,Fq8j4D,nJrmP6/

 

[markc1999]

Ordered the case. I will see if my current PSU fits. If not I'll see about that one. Thank you for your help

 

[Barty1884]

Ordered the case. I will see if my current PSU fits. If not I'll see about that one. Thank you for your help

The PSU will "fit", I've used the 110 before myself with a similar sized ATX PSU..... but it'll be tight with the cooler.

It might actually fit - found this image:

https://pcpartpicker.com/b/DFTCmG

Which looks like it'll leave the full clearance for an ATX PSU over-top.
Now whether or not it'll perform ideally.... is pretty obvious. But it looks like it should 'fit' at the very least.

 

[markc1999]

So uhh. Yea, it fit. Seems to be fine.. however... WAAAAAAAAAAAAAAAAY too short to hold the GPU... Damn dude.
I just went ahead and left the shell off, and used a PCI-E extender or w/e they are called to basically just plunk the video card on top of the case (fans up)
It's working fine (I'm on it now)