CheckMateknight :
titanHUNTER :
CheckMateknight :
titanHUNTER :
Between only running one GPU and getting the CM Hyper Evo, your cooling should be fine. Just be sure to install the fans wherever the case allows. That means 1 exhaust on back and 1 exhaust on top. Also, one or two side panel fan(s) will go a long way in not only keeping your GPU cool but also the ambient temperature in your entire case. Although one 270x does not have overheating issues.
What if i get a second 270x will i need to get a better psu?
kira70591 :
CheckMateknight :
titanHUNTER :
Between only running one GPU and getting the CM Hyper Evo, your cooling should be fine. Just be sure to install the fans wherever the case allows. That means 1 exhaust on back and 1 exhaust on top. Also, one or two side panel fan(s) will go a long way in not only keeping your GPU cool but also the ambient temperature in your entire case. Although one 270x does not have overheating issues.
What if i get a second 270x will i need to get a better psu?
Just to be safe you could always get a 600w or a 750w. I have always used and prefer Corsair PSUs. This would also allow for expansion if you wish to upgrade in the future. Power supplies are one of those things that you can transfer between builds as long as it has the cable expansion that you need. Always invest in a good quality PSU. Apart from a quality motherboard, it is one of the most important items in your rig.
Yes. The PSU you are getting most likely will not even have the additional two 6-pin cables necessary for two graphics cards. I can speak from personal experience as my new rig has two XFX R9-270x GPUs.
I initially purchased a quality PSU (XFX Pro series 750 watt 80 gold cert). However, it ran extremely hot and began to smell like burning plastic/copper and the fan would squeal really loud. So I got an 1300 watt PSU for future upgrades. I also had to purchase another case that had a VGA side panel fan option to keep them cool (they would shoot up to 84 degrees then throttle down).
I would personally recommend a 750 watt power supply for your rig. According to the specs of the 270x, you only need 600 watts for Crossfire. That way, you can either get another 270x or upgrade to a single 280x/290x (or Nvidia equivalent).
Okay i will change the psu later but can you tell me what case i have so i can check if all the parts will fit?
I did not see a case on your parts list. However, you can fit all of your parts in either a mid tower or full tower. The difference between a mid and full are only a few inches. However, those inches are the difference maker when trying to insert a large graphics card. Nevertheless, you could go with either a mid tower or full tower. It depends on your current budget and future upgrading plans. Most mid towers get the job done. Here are some pointers when looking for any case:
1. Maker sure the case (either mid or full) has a raised back panel. This way, you have room to route your cables behind the back plate.
2. Maker sure the case (either mid or full) has a cut-out for the heat sink back plate. It will be a large square-shaped hole in the middle of the case when viewing it with the side panel removed. This way, you can install/uninstall heat sinks without taking out the entire motherboard.
3. If possible, get a case that has an option for a side panel fan (e.g. the fan in the window). This way, your graphics card(s) stays cool.
4. If you get the CM Hyper Evo 212, make sure the case is large enough. Although it should fit in most mid towers. I first bought a mid tower case, and I did not have any problems fitting the CM Hyper Evo 212.
5. Make sure the case has 120mm, 140mm or 200mm fan options for best cooling options. Stay away from 80 mm fans.
Hope this helps. Go to Newegg---Computer Hardware---Computer Cases to search for some mid and full tower cases for your budget!