Question Need correct timings after o'cing

gary_murphy101

Reputable
Jan 6, 2018
177
0
4,680
Hi guys. Just wondering what the correct timings for Corsair vengeance lpx are. I overclocked last night to gain performance in pubg which worked a treat. Fps is a lot more stable and higher. The sticks speed was 2400, kept increasing till I got to 3000 which caused major instability but 2900 works great. 5 hours gaming with no crashes. I did increase the voltage to 1.35. I have 2x8 gb sticks on a asrock z370 mb
 

gary_murphy101

Reputable
Jan 6, 2018
177
0
4,680
SDoCgPg.png
 
Oh. That is 2400mhz ram.
Operation beyond 2400mhz is overclocking and not guarantied.

You're using timings from 2400mhz mode. For 2900mhz timings normally would need to be increased.
If it's working stable at 2900mhz, then this is a good result.

One thing to change - set command rate to 1T.
2T command rate setting is for 4 module configurations. You don't need it.
Also - you should probably run memtest86, to confirm ram is operating stable.