That is acceptable. If the radiator takes up the rear fan position, you could use the SYS_FAN header near the back corner. As long as you run the pump at constant speed, it doesn't matter where it is plugged in.But is running the pump in cpu_opt correct. The fan on the radiator is plugged into cpu fan
Generally running the pump at full speed is recommended.hi I'm using corsair h60 cooler on a gigabyte z170 gaming 7 mb . I have the pump set to cpu_opt. Is this correct. Looking at bios I have set cpu_opt to run at full speed which is at 4200 rpm. Is this safe. Please help
That is acceptable. If the radiator takes up the rear fan position, you could use the SYS_FAN header near the back corner. As long as you run the pump at constant speed, it doesn't matter where it is plugged in.But is running the pump in cpu_opt correct. The fan on the radiator is plugged into cpu fan
Ok thanks. I will leave it as it is. Just worried that the pump wouldn't work being plugged into cpu_optThat is acceptable. If the radiator takes up the rear fan position, you could use the SYS_FAN header near the back corner. As long as you run the pump at constant speed, it doesn't matter where it is plugged in.