Need help. computer wont boot windows? overclocking failed error

[longthedrag0n]

i have general question. i want to know if my mobo works fine. i have a asus x99a and if i am able to enter the bios settings. does that mean my mobo is fine? i want to know if it is an mobo issue. i am having difficult time installing the windows 10. i am creating a windows 10 usb installation media right now and am going to reinstall or repair it.

 

[g1abhi]

Entering into Bios cannot justify that your motherboard is fine , but installation problems are caused by other peripherals like hard drives and Ram corruptions . the motherboard is very unlikely to be the faulty one , especially a X99 . Can you explain more about the real problem you have.

 

[longthedrag0n]

Entering into Bios cannot justify that your motherboard is fine , but installation problems are caused by other peripherals like hard drives and Ram corruptions . the motherboard is very unlikely to be the faulty one , especially a X99 . Can you explain more about the real problem you have.

[/b

okay i've reinstalled windows 10 and it says it would restart the computer. it just turned off and did not restart. i had to turn it back on. The asus logo run then i get the overlocking failed error and i get the bios set up and i see that there is a "windows boot manager" on the top of a list for boot priority. bios is 1801. i do not know what is wrong. i've provided pictures below of the bios. i've put the settings on default in the bios. i do not know why it is having an over clocking failed error. i did not over clock anything. please help. i'm looking at my bios, it is reading/ detects my ram, ssd, and processor correctly. so i do not think its because of those.

 

[g1abhi]

Strangely your memory is shown as 2133Mhz in information while in the DIMM slots it shows 2667MHz . Please confirm what frequency your RAM supports . also if it supports XMP or not. Set it manually to 2133Mhz and then try to boot. You can also try default settings .

 

[longthedrag0n]

Strangely your memory is shown as 2133Mhz in information while in the DIMM slots it shows 2667MHz . Please confirm what frequency your RAM supports . also if it supports XMP or not. Set it manually to 2133Mhz and then try to boot. You can also try default settings .

These are the kingston hyperx 2666mhz. they have been over clocked to 3200mhz by previous owner before. so it should support xmp. I see the XMP is disabled on the bios settings. i just found out my RAM is faster than my MOBO. the max non overclocked frequency on the mobo is 2133mhz, i need to enable the XMP. i do not know if this will resolve the issue? do you think this is the issue why my computer was not working?


http://www.amazon.com/Kingston-2666MHz-Non-ECC-HX426C15FBK4-32/dp/B00TPQPURS

 

[longthedrag0n]

i just put the below parts together and installed windows. i do not know if the windows installation was successful but in one of the pictures on the right side it says windows boot manager. im assuming it was successful?

ASUS X99-A/ 3.1
32gb kinston hyperx 2666mhz
samsung ssd 1tb
5960x
970 gtx hybrid
evga 850 gq psu
swiftech h320x2
fractal design S case

 

[g1abhi]

Strangely your memory is shown as 2133Mhz in information while in the DIMM slots it shows 2667MHz . Please confirm what frequency your RAM supports . also if it supports XMP or not. Set it manually to 2133Mhz and then try to boot. You can also try default settings .

These are the kingston hyperx 2666mhz. they have been over clocked to 3200mhz by previous owner before. so it should support xmp. I see the XMP is disabled on the bios settings. i just found out my RAM is faster than my MOBO. the max non overclocked frequency on the mobo is 2133mhz, i need to enable the XMP. i do not know if this will resolve the issue? do you think this is the issue why my computer was not working?


http://www.amazon.com/Kingston-2666MHz-Non-ECC-HX426C15FBK4-32/dp/B00TPQPURS

yes , try various frequencies wth xmp on. but dont go too high.

 

[longthedrag0n]

Strangely your memory is shown as 2133Mhz in information while in the DIMM slots it shows 2667MHz . Please confirm what frequency your RAM supports . also if it supports XMP or not. Set it manually to 2133Mhz and then try to boot. You can also try default settings .

These are the kingston hyperx 2666mhz. they have been over clocked to 3200mhz by previous owner before. so it should support xmp. I see the XMP is disabled on the bios settings. i just found out my RAM is faster than my MOBO. the max non overclocked frequency on the mobo is 2133mhz, i need to enable the XMP. i do not know if this will resolve the issue? do you think this is the issue why my computer was not working?


http://www.amazon.com/Kingston-2666MHz-Non-ECC-HX426C15FBK4-32/dp/B00TPQPURS

yes , try various frequencies wth xmp on. but dont go too high.

i've ran memtest for my ram and there are no errors. i do not know what is going? i do not know why it wont work. i reinstall windows 10 multiple times but after it finish installing. it would say it would need to restart but after the restart it would freeze at the asus logo

 

[longthedrag0n]

i think it is a motherboard issue. i've tested all my other components and there is nothing wrong with them. A RMA has been requested by Asus and it is going to be shipped to be repaired or replaced. thanks everyone for helping.

 

[g1abhi]

In the meantime if possible , try to install windows 10 from another source and another media , possibly a clean untouched version available on torrent and write it on USB media.