Question Need help identifying cables.

[Paperdoc]

Use the mobo A_RGB_LED1 header at top front. Plug into that the wider ARGB connector. Its layout often is called a (4-1) connector because it has space for 4 holes, but one is blocked off. For that design there is only ONE way to plug in, so no confusion. Do NOT try to use the 4-pin RGB_LED header (key no. 26) on the bottom edge.

 

[RenTheReaper]

Use the mobo A_RGB_LED1 header at top front. Plug into that the wider ARGB connector. Its layout often is called a (4-1) connector because it has space for 4 holes, but one is blocked off. For that design there is only ONE way to plug in, so no confusion. Do NOT try to use the 4-pin RGB_LED header (key no. 26) on the bottom edge.

Very well, I shall do that and go ahead and test it!

 

[RenTheReaper]

That PSU has three ports on it labelled "SATA", and the specs say it comes with two cables to plug into those - one has 4 SATA power output connectors, the other has three. You got thuis figured out, I think.

Yes, when I said a cable with "two different versions of ARGB mobo headers, and you use ....", I was referring to that cable in your photos with two connectors on it - one with three evenly-spaced holes and labels "VGD" (for some Gigabyte mobos), and the other with what looks like 4 holes but hole #3 blocked off, used by more mobo makers.

It works!!! Thank you very heavily a thousand times for your time and help!!!!!!

http://imgur.com/a/hc2jqzq

View: https://imgur.com/a/hc2jqzq

I shall proceed to install the other case fans and close it up, hahaha.

 

[Paperdoc]

Glad to hear you got it working! Congrats.