Need help,isthis monitor hdmi 2.2 compliant and i get an error playing 4k says hdcp 2.2 required

[WINTERLORD]

i have a intel 8700k also have a pioneer ultra hd 4k player BDR-211UBK made for this bought retail 120$
now my monitor is a 27UD68 LG
i have cyberlink 14 that came with

why cant i play this? i dont have a graphics card at moment am relying on the 8700k i enabled sgx in the bios.

what is wrong here what do i need to do

update; i installed new firmware. 1.50 succesful
now i installed cyberlink power dvd 17 trial and when using it it says unsupported disk in drive F. what do i do? i tryed cyberlink 14 again same error hdcp 2.2
do i have to use a hdmi cable or is a the better display port ok?

 

[Dunlop0078]

Not sure. Have you installed the intel iGPU drivers for the 8700k? I would start there if you haven't. The iGPU in the 8700k should support HDCP 2.2, but may need the proper drivers installed.

 

[WINTERLORD]

yes i have that driver installed. is my monitor ok for this?
here are the specs im wonderin bout the hdmi 2.0 and 2.2 is mine not compatable for that dumb tech
http://www.lg.com/us/monitors/lg-27UD68-W-4k-uhd-led-monitor

 

[WINTERLORD]

bump really need some help with this

 

[xrodney]

27UD68-W support HDCP 2.2 according to documentation.
What GPU are you using, not sure about AMD drivers, but in Nvidia control panel you can see your currrent HDCP status: http://users.wfu.edu/yipcw/lenovo/2011/w520/images/w520-sound-no_hdmi_nvidia-hdcp-pana.gif

There might be problem with Cyberlink SW itself or with GPU driver (try to use WHQL driver).
As well you can try diagnostic tool from Cyberlink to test what can be wrong: http://www.cyberlink.com/prog/bd-support/diagnosis.do