Need help really fast pls ! Phanteks Thermal Compund

[MRAeRozz]

I dont know how to get the paste out!I tried pressing it and nothing happens.Nothing is explained for it

 

[DiegoD]

Does the end of the syringe need to be punctured?

 

[MRAeRozz]

Does the end of the syringe need to be punctured?

doenst tell it but i try
and nope doesnt work

 

[avarice]

Looking at an image - it's in a syringe. Take off the cap - look at the tip - if the tip is sealed - you may need to nip the end off with a utility knife.

Then you push the plunger slowly to get the compound out.

It should be that simple.


If it doesn't come out - take a solid toothpick and stick it up the end and see if there is a membrane that needs to be perforated (unlikely but that is how Caulk works.)

You should also get trace amounts on the toothpick - but that isn't enough for your needs.


At the absolute worst - you take a utility knife and open up the damned thing - it will only be good for one use of course.

 

[DiegoD]

Because you are having trouble I would suggest pressing on to a napkin and then after you get some to come out actually put the compound onto your cpu. Remember you only need a pea-sized bead.