Need help to choose 120mm fan for my 3x radiator.

[matvey]

i looking for quite and good performing fan i am thinking to get Noctua fans, but i read a lot of reviews that all about this fan is a lie.

 

[ortoklaz]

if you looking for good quiet fan Noctua 1300rpm fits the bill ,i own fiev of them but i found them to be overrated and well overprice ,if you looking for better fan than noctua for your rad i would suggest Scythe Gentle Typhoon 1800rpm(fan controller comes handy if you like thinks quiet) if you lucky to find them online;
http://www.sidewindercomputers.com/scge120mmsic2.html
look for fans with good static pressure

 

[RJR]

All depends on the radiator, lower FPI = lower speed fan you can get away with, higher FPI = you need a higher speed fan.

 

[matvey]

my is lower FPI http://www.dangerden.com/store/tfc-x-changer-triple-radiator-360.html#tabs

 

[ortoklaz]

my is lower FPI http://www.dangerden.com/store/tfc-x-changer-triple-radiator-360.html#tabs

you be fine with noctua's 1300 rpm is very comfortable i have them on XSPC RX240(8FPI)and EK-XT 240 but if you own fan controller get something around 1600-1800rpm

http://www.madshrimps.be/articles/article/892/0
this is for rad fans;
http://www.madshrimps.be/articles/article/936/

 

[matvey]

you be fine with noctua's 1300 rpm is very comfortable i have them on XSPC RX240(8FPI)and EK-XT 240 but if you own fan controller get something around 1600-1800rpm

http://www.madshrimps.be/articles/article/892/0
this is for rad fans;
http://www.madshrimps.be/articles/article/936/

THANK YOU MAN! it is very help full and interesting.

 

[matvey]

i think i will get 6 SCYTHE GENTLE TYPHOON 120MM 1150RPM and make push /pull setup. how you think?

 

[Shadow703793]

^ Yes, I'd take the Gentle Typhoons over the Noctua personally. Anyways, try with just push or pull first.