Need help with front io panel cables

[christapia54]

I have a new case and was going to install in new motherboard but doesnt work so i will use the old one that came with the pre built pc i bought but the motherboard doesnt have a manual for me to plug in the panel connections so im out of luck if someone could help me install them id appreciate it also the motherboard came from this pc



https://www.amazon.com/G11CD-US006T-Gaming-Desktop-Nvidia-GTX980/dp/B016E80LF0




The panel connectors have

POWER SW +-

RESET SW+-

POWER LED -

Power led +

H.D.DLED +-

 

[Paul NZ]

Is this it?

 

[christapia54]

Yes but it doesnt have motherboard instructions

 

[Paul NZ]

If its a system, everything should be connected already

 

[geofelt]

Trial and error.
There is only one set that you truly need, namely the power switch.
The pwr switch is a momentary switch that is not polarity sensitive.
Connect one lead to what you might guess is a ground pin, then try adjacent pins and see if it powers up.
If you get it wrong, nothing bad will happen.

 

[Satan-IR]

I have a new case and was going to install in new motherboard but doesnt work so i will use the old one that came with the pre built pc i bought but the motherboard doesnt have a manual for me to plug in the panel connections so im out of luck if someone could help me install them id appreciate it also the motherboard came from this pc



https://www.amazon.com/G11CD-US006T-Gaming-Desktop-Nvidia-GTX980/dp/B016E80LF0




The panel connectors have

POWER SW +-

RESET SW+-

POWER LED -

Power led +

H.D.DLED +-

Isn't the motherboard model printed on the PCB?

I think those models from Asus have some variant of the Asus H110 motherboards.