need help with my 1st build plzzzzzzzz

Status
Not open for further replies.

rts1189

Honorable
Nov 4, 2013
12
0
10,510
ok so im building my 1st gameing pc so i need help i got all the parts so i put the cpu and heatsink that whats people do 1st i think so. next is ram that is where i need help the ram wont fin inside the motherborad the site said all stuff was good to go so can u guys double check it plzzz. like i dont want to buy another ram but if i have to i will thanks in advance.

here is the link to what parts i got
http://pcpartpicker.com/p/1b7A8

i need help with the ram is it going to fin in the moba plzzzz answer
 
Solution
As I read your post you have the parts but can't the ram sticks in the board? First, make sure the tabs on the sides of the slots are open. Line up the ram and push firmly. It should snap into place. If it doesn't, double check the ram. You might have to flip them around to line the notch up correctly. As the guys above pointed out you bought stuff that works together.
As I read your post you have the parts but can't the ram sticks in the board? First, make sure the tabs on the sides of the slots are open. Line up the ram and push firmly. It should snap into place. If it doesn't, double check the ram. You might have to flip them around to line the notch up correctly. As the guys above pointed out you bought stuff that works together.
 
Solution
Status
Not open for further replies.