Archived from groups: rec.games.video.arcade.collecting (
More info?)
I don't know if they have the parts, but I bought a new flyback from them
for my NT27E last year and I found them the be very responsive and quite
reasonably priced. It cost my about $70. That was cheaper then anywhere
else I looked.
Adam
"Mike Purcell" <MPurcell@nospamhfx.eastlink.ca> wrote in message
news:GVKZd.58590$fc4.23341@edtnps89...
> Russ;
>
> Thanks I will contact them. Do you know if Neotec sells replacement neck
> boards like WG and most others seem to do. I traced down 2 of the 3 parts
> I need on my neck board and they taotal about 25% more than what Wico
> charges for the entire neck board for a 27" WG. Might be nice to just get
> the whole thing and be done with it.
>
> Thanks
> Mike
>
>
>
> "Russ" <StateStreetAmusements@hotmail.com> wrote in message
> news:CcKZd.5461$b_6.3094@trnddc01...
>> Neotec is still in business in California. Google should turn them up..
>> If that doesn't work call betson pacific and see if they have one. They
>> service monitors. They are Betson.com. If that doesn't work P&L Video
>> games. will probably sell you the part. They are in California. Their
>> number should turn up with a google search also.
>> "Mike Purcell" <MPurcell@nospamhfx.eastlink.ca> wrote in message
>> news
😛nJZd.46337$i6.22470@edtnps90...
>>>I have a Neotec NT27E monitor that I think has the following parts bad.
>>>C3788 which accroding to NTE crosses over to a NTE2501 and a TR C4367
>>>which I can find no where, anyone know what the hell this is??
>>>
>>> By the way its the predrive trasistor for the HF NTE2501 on the
>>> neckboard.
>>>
>>> Thanks
>>>
>>> Mike
>>>
>>> --
>>> Mike Purcell
>>> Home of the Pinball FTP Manual Site
>>>
>>>
>>
>>
>
>
Facebook
Twitter
Instagram