Nepton240M Pump cable

[Jovan93]

Can i place the pump cable on the FAN slot 4pin or can i even plug it in the 12V spliter from PSU? I want to use CPU and CPU Optional fan slots as default for fans only not the pump couse i have the odd feeling that my fans are not going at same RPM when i use splitter that came from the box as default nepton cable

Im kinda new to this AIO so if someone can enlighten me with some info it would be much appriciated

 

[BSOD BSTD]

yes you can plug it into either of these. the pump should run at full 'rpm' so molex will do the trick, if you plug it into the FAN header make sure you set it to 100% rpm.

 

[Jovan93]

yes you can plug it into either of these. the pump should run at full 'rpm' so molex will do the trick, if you plug it into the FAN header make sure you set it to 100% rpm.

i need something like 4pin molex adapter does that even exist?

http://i.imgur.com/52PeIec.jpg
Something like this but with 4pin so i can place the PWM adapter that is on the pump?

 

[BSOD BSTD]

is there not a SYS_FAN or spare FAN header on your motherboard? better to use those. but yes you can get adapters.