Netgear R7000 On Asuswrt-Merlin(Remote Access Router How To)

[nitinvaid20]

I am using netgear R7000 Wifi Router With Asuswrt-Merlin firmware what i want to ask is is it possible to remotely access this router over the internet somehow? here are 2 screenshots of the settings i played with

http://i65.tinypic.com/2vdm9tl.jpg

http://i65.tinypic.com/mhyuk5.jpg

 

[bill001g]

How did you get the merlin software to run a on netgear I didn't think they supported running on anything other than asus.

Anyway, I would first try using the IP addresses directly. You should see the wan ip in the wan panel. It does not change often so it will let you test and find out if the problem is getting access or if it is a issue with the DDNS stuff. In most cases it is the DDNS causing the issue.

I would not recommend you use HTTP to do this you really should always use https.

 

[nitinvaid20]

How did you get the merlin software to run a on netgear I didn't think they supported running on anything other than asus.

Anyway, I would first try using the IP addresses directly. You should see the wan ip in the wan panel. It does not change often so it will let you test and find out if the problem is getting access or if it is a issue with the DDNS stuff. In most cases it is the DDNS causing the issue.

I would not recommend you use HTTP to do this you really should always use https.

It's a custom firmware available for my R7000 like dd-wrt

 

[tarunagg]

How did you get the merlin software to run a on netgear I didn't think they supported running on anything other than asus.

Anyway, I would first try using the IP addresses directly. You should see the wan ip in the wan panel. It does not change often so it will let you test and find out if the problem is getting access or if it is a issue with the DDNS stuff. In most cases it is the DDNS causing the issue.

I would not recommend you use HTTP to do this you really should always use https.

Which DDNS to use and what are the main address that i am gonna use to logme in
these stufs are so confusing