New AMD build need BIOS help no overclocking

[pensburgh256]

My setup is as follows, I just want to run everything at stock speed (I have the stock cooler on for now) so I could use some input into the bios. Should I just run with everything on auto? Bios has the cpu at 39 degrees celsius at idle right now and the only thing I've been able to figure out is to maybe crank the memory frequency from auto to 1866. Any guides out there? Thanks!


PCPartPicker part list: http://pcpartpicker.com/p/XqVP99
Price breakdown by merchant: http://pcpartpicker.com/p/XqVP99/by_merchant/

CPU: AMD FX-6300 3.5GHz 6-Core Processor ($99.99 @ Newegg)
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ($29.99 @ Micro Center)
Motherboard: Asus M5A97 R2.0 ATX AM3+ Motherboard ($89.99 @ Micro Center)
Memory: G.Skill Ares Series 8GB (2 x 4GB) DDR3-1866 Memory ($81.99 @ Newegg)
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive ($56.99 @ Micro Center)
Video Card: Sapphire Radeon R9 280 3GB Dual-X Video Card ($164.99 @ Newegg)
Case: Corsair 200R ATX Mid Tower Case ($49.99 @ Micro Center)
Power Supply: SeaSonic S12II 620W 80+ Bronze Certified ATX Power Supply ($68.98 @ Newegg)
Operating System: Microsoft Windows 8.1 - 64-bit (OEM) (64-bit)
Total: $642.91
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2014-11-22 18:31 EST-0500

 

[Suztera]

By default, your pc will run at default speeds.
In the BIOS, Load Optimized Defaults and save changes. Then check if the ram is running at 1866. If not you just need to change that.